기기를 수리하세요 커뮤니티 상점

HP Chromebook 11 G6 EE Keyboard Assembly Replacement

필요한 것

  1. HP Chromebook 11 G6 EE Keyboard Assembly Replacement, Remove keyboard screws: 1 단계, 이미지 1/1

    • Remove the screws from the bottom case.

    • Two M2.5x8 PH1 screws.

    • Six M2.5x6 PH1 screws.

    편집

  2. HP Chromebook 11 G6 EE Keyboard Assembly Replacement, Remove keyboard: 2 단계, 이미지 1/2 HP Chromebook 11 G6 EE Keyboard Assembly Replacement, Remove keyboard: 2 단계, 이미지 2/2

    • Use a plastic opening pick to release the clips that secure the keyboard.

    • Avoid too much prying force. If you pry too hard, you'll break your pick. The trick is to get the pick in just a little bit, and then run it along the edge of the device.

    • DO NOT use metal tools for this step.

    편집

  3. HP Chromebook 11 G6 EE Keyboard Assembly Replacement, Disconnect keyboard: 3 단계, 이미지 1/1

    • Lift up the keyboard part way, being careful to not put stress on the keyboard and touchpad ribbon cables.

    편집

  5. HP Chromebook 11 G6 EE Keyboard Assembly Replacement, Disconnect keyboard: 4 단계, 이미지 1/3 HP Chromebook 11 G6 EE Keyboard Assembly Replacement, Disconnect keyboard: 4 단계, 이미지 2/3 HP Chromebook 11 G6 EE Keyboard Assembly Replacement, Disconnect keyboard: 4 단계, 이미지 3/3

    • Lift up the keyboard part way, being careful to not put stress on the keyboard and touchpad ribbon cables.

    • Disconnect the keyboard ZIF connector

    편집

  6. HP Chromebook 11 G6 EE Keyboard Assembly Replacement, Disconnect touchpad: 5 단계, 이미지 1/2 HP Chromebook 11 G6 EE Keyboard Assembly Replacement, Disconnect touchpad: 5 단계, 이미지 2/2

    • Disconnect touchpad ZIF connector.

    • Now you can remove the keyboard assembly completely.

    편집

    • If your replacement keyboard came with touchpad and cable, you can start reassembling the computer now. If you need to retrieve the touchpad from the old keyboard, keep reading.

    편집

  8. HP Chromebook 11 G6 EE Keyboard Assembly Replacement, Remove touchpad: 7 단계, 이미지 1/1

    • Lift up the plastic guard covering the three PH0 M2x2 screws and remove them.

    • Lift the touchpad out and place into new keyboard.

    • Be sure to evenly tighten the touchpad screws during reinstallation. Even a small variance can lead to a touchpad that feels "off".

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Isaac

1,095 평판

안내서 7개 작성하였습니다

배지: 11

배지 +8개 더

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 15

전체 시간: 864