주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

This guide will help you replace your power module in a HP Color Laser Jet Pro MFP M277dw.

  1. Open and lower the back panel by pulling it down. Remove one Phillips #2 10 mm screw. Remove one Phillips #2 10 mm screw.
    • Open and lower the back panel by pulling it down.

    • Remove one Phillips #2 10 mm screw.

  2. Use the plastic opening tool to remove the right side panel of the printer. Flipping the printer on its side, with the right side facing up, will make it easier to remove. Flipping the printer on its side, with the right side facing up, will make it easier to remove.
    • Use the plastic opening tool to remove the right side panel of the printer.

    • Flipping the printer on its side, with the right side facing up, will make it easier to remove.

  3. OPEN ALL THE TABS

    RAM Upgrade Kits for Mac

    키트 쇼핑하기

    Enough RAM
    For All The Tabs

    키트 쇼핑하기
  4. Remove two Phillips #2 12mm screws. Remove four different pin connectors that attach to the power module located at the bottom. Removing the white connector is  made easier with assistance of a spudger/flat tip that loosens the clamp.
    • Remove two Phillips #2 12mm screws.

    • Remove four different pin connectors that attach to the power module located at the bottom.

    • Removing the white connector is made easier with assistance of a spudger/flat tip that loosens the clamp.

  5. Remove two Phillips #2 10mm from the left (front) and right (back) side that attach the power module to the printer. Remove two Phillips #2 10mm from the left (front) and right (back) side that attach the power module to the printer.
    • Remove two Phillips #2 10mm from the left (front) and right (back) side that attach the power module to the printer.

  6. Slowly lift the power module from the printer using both hands. Slowly lift the power module from the printer using both hands. Slowly lift the power module from the printer using both hands.
    • Slowly lift the power module from the printer using both hands.

결론

To reassemble your device, follow these instructions in reverse order.

Lyndon Fresnido

회원 가입일: 2018년 10월 08일

121 평판

안내서 1개 작성함

Cal Poly, Team S4-G2, White Fall 2018 Cal Poly, Team S4-G2, White Fall 2018 회원

CPSU-WHITE-F18S4G2

3 회원들

안내서 5개 작성하였습니다

Hello, wäre can i buy the power supply? Thank you

Jakob Hetzendorfer - 답글

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 11

30일 전: 63

전체 시간: 999