소개

If your printer is improperly taking in your paper through the bottom tray, you may need to replace your rollers. With nothing but a #2 Phillips screwdriver, you will be able to quickly remove them.

부품

부품은 필요하지 않습니다.

  1. Remove the bottom tray by pulling it until it fully is out of the printer. Remove the bottom tray by pulling it until it fully is out of the printer.
    • Remove the bottom tray by pulling it until it fully is out of the printer.

  2. Turn the printer upside down. Pull out the white manual feed tray. Pull out the white manual feed tray.
    • Turn the printer upside down.

    • Pull out the white manual feed tray.

  3. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  4. Remove one Phillips #2 8mm screw. Remove one Phillips #2 8mm screw.
    • Remove one Phillips #2 8mm screw.

  5. Push on the exposed piece of rod that pokes out of one end of the roller. Pull out the now unscrewed and free rod. Pull out the now unscrewed and free rod.
    • Push on the exposed piece of rod that pokes out of one end of the roller.

    • Pull out the now unscrewed and free rod.

  6. Use your thumb to push in the white plastic hanging over the roller and use your index finger to pry the roller out. Use your thumb to push in the white plastic hanging over the roller and use your index finger to pry the roller out.
    • Use your thumb to push in the white plastic hanging over the roller and use your index finger to pry the roller out.

결론

To reassemble your device, follow these instructions in reverse order.

Yvan Gonzalez

회원 가입일: 2018년 10월 08일

121 평판

안내서 1개 작성함

Cal Poly, Team S4-G2, White Fall 2018 Cal Poly, Team S4-G2, White Fall 2018 회원

CPSU-WHITE-F18S4G2

3 회원들

안내서 5개 작성하였습니다

조회 통계:

지난 24시간: 10

지난 7일: 29

지난 30일: 131

전체 시간: 397