주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

소개

This guide will help you replace the wireless card in an HP Color LaserJet Pro MFP M277dw. You will need a plastic opening tool and a Phillips #2 screwdriver head.

부품

지정된 부품이 없습니다.

  1. Remove paper tray by pulling it straight out.
    • Remove paper tray by pulling it straight out.

    • The tray should just slide out with little to no resistance.

  2. Nintendo Switch 키트

    게임으로 돌아가기 위한 빠른 해결책

    Nintendo Switch 키트 쇼핑하기

    Nintendo Switch 키트

    게임으로 돌아가기 위한 빠른 해결책

    Nintendo Switch 키트 쇼핑하기
  3. Lower the back panel by pulling it down from the upright position. Remove one Phillips #2 10mm screw. Use the plastic opening tool to remove the left side panel.
    • Lower the back panel by pulling it down from the upright position.

    • Remove one Phillips #2 10mm screw.

    • Use the plastic opening tool to remove the left side panel.

    • Flipping the printer onto its side makes it easier to remove the panel and access the motherboard.

  4. Remove one Phillips #2 11mm screw. Remove the wireless card.
    • Remove one Phillips #2 11mm screw.

    • Remove the wireless card.

    • The wireless card is connected to the circuit board with pins, it will take a bit of force to remove it.

결론

To reassemble your device, follow these instructions in reverse order.

Christopher Fahey

회원 가입일: 2018년 10월 08일

609 평판

안내서 3개 작성하였습니다

Cal Poly, Team S4-G2, White Fall 2018 Cal Poly, Team S4-G2, White Fall 2018 회원

CPSU-WHITE-F18S4G2

3 회원들

안내서 5개 작성하였습니다

Would you share the part number of the module, better off a link to where it is sold. Thanks.

Jonathan Chan - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 8

30일 전: 36

전체 시간: 554