기기를 수리하세요 커뮤니티 상점

HP Compaq 2510p RAM Replacement

소개

This guide requires only two screws to be removed with Phillips head screwdriver. Once the panel is removed, the ram can easily be pulled out.

필요한 것

  1. HP Compaq 2510p RAM Replacement, RAM: 1 단계, 이미지 1/1

    • Flip the device over so the back panel is facing upwards. Locate the RAM plate cover towards the left side of the laptop. There will be two screws located on the panel.

    편집

  2. HP Compaq 2510p RAM Replacement: 2 단계, 이미지 1/1

    • Remove both screws holding the RAM cover plate in place using your Phillips Screwdriver.

    편집

  4. HP Compaq 2510p RAM Replacement: 3 단계, 이미지 1/1

    • Remove the cover plate by lifting upwards once screws are removed.

    편집

  5. HP Compaq 2510p RAM Replacement: 4 단계, 이미지 1/1

    • Carefully release the pins that are securing the RAM in place by pushing in a outward motion, away from the RAM.

    • Be sure to ground yourself before touching the RAM.

    • Be gentle when releasing the pins.

    편집

  6. HP Compaq 2510p RAM Replacement: 5 단계, 이미지 1/1

    • Remove the old RAM by lifting it upwards, then pulling.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Nathan Pereira

회원 가입일: 10/26/16

57 평판

안내서 1개 작성함

배지: 5

배지 +2개 더

팀

UMass Dartmouth, Team 3-8, Isaacson Fall 2016 UMass Dartmouth, Team 3-8, Isaacson Fall 2016 회원

UMASSD-ISAACSON-F16S3G8

3 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 4

전체 시간: 759