주요 콘텐츠로 건너뛰기

HP Elite x2 1012 G2 Screen Replacement

필요한 것

  1. HP Elite x2 1012 G2 Screen Replacement, Screen: 1 단계, 이미지 1/1
    • Make sure the device is turned off before starting.

    • Orient the device so the back is facing you, with the kickstand up.

  2. HP Elite x2 1012 G2 Screen Replacement: 2 단계, 이미지 1/3 HP Elite x2 1012 G2 Screen Replacement: 2 단계, 이미지 2/3 HP Elite x2 1012 G2 Screen Replacement: 2 단계, 이미지 3/3
    • Remove the six 3mm Torx T5 screws underneath the kickstand.

  3. HP Elite x2 1012 G2 Screen Replacement: 3 단계, 이미지 1/2 HP Elite x2 1012 G2 Screen Replacement: 3 단계, 이미지 2/2
    • Turn the device over so the screen is facing you.

    • Place a suction cup firmly onto a corner of the screen.

    • Lift up gently until you see the screen separate from the casing.

    • Repeat this process for all four corners.

  4. HP Elite x2 1012 G2 Screen Replacement: 4 단계, 이미지 1/1
    • Lift the screen up and off of the device.

    • Pry each corner up first, otherwise you may damage or crack the screen.

  5. HP Elite x2 1012 G2 Screen Replacement: 5 단계, 이미지 1/3 HP Elite x2 1012 G2 Screen Replacement: 5 단계, 이미지 2/3 HP Elite x2 1012 G2 Screen Replacement: 5 단계, 이미지 3/3
    • Remove the two connectors on the back of the screen by lifting the connector tabs on the motherboard with a plastic opening tool and pulling gently.

  6. HP Elite x2 1012 G2 Screen Replacement: 6 단계, 이미지 1/2 HP Elite x2 1012 G2 Screen Replacement: 6 단계, 이미지 2/2
    • Remove the screen by gently lifting it off of the device.

결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

Noah Stapp

회원 가입일: 04/18/18

722 평판

안내서 2개 작성하였습니다

Cal Poly, Team S18-G5, Livingston Spring 2018 Cal Poly, Team S18-G5, Livingston Spring 2018 회원

CPSU-LIVINGSTON-S18S18G5

4 회원들

안내서 13개 작성하였습니다

댓글 5개

Where can I purchase a screen for the HP Elite x2 1012 g2?

Greg M - 답글

just completed this, VERY surprising to find a HP product with an easy install

CILLIAN BYRNE - 답글

Just finished a repair and very easy to do. Thank you!!

Richard Taylor - 답글

The touch stopped working after the replacement. Any suggestions?

el._.msn - 답글

I replaced my screen and upon turning the device on I have a black screen. Already made sure connections are all attached correctly. Tried hard reset with power and volume button down for 15 seconds. A bad new screen? Any other ideas?

iamacomputertech - 답글

댓글 쓰기

조회 통계:

24 시간 전: 3

7일 전: 23

30일 전: 129

전체 시간: 8,354