메인 컨텐츠로 가기

소개

The print head of the HP Envy 5660 is the piece that puts the ink onto the paper inserted into the printer. This guide will go over the replacement of the print head.

부품

지정된 부품이 없습니다.

  1. Open the printer so that the underside of the scanner is showing.
    • Open the printer so that the underside of the scanner is showing.

  2. Unscrew the black 11.5 mm screw closest to the front right corner using a T10 screw bit.
    • Unscrew the black 11.5 mm screw closest to the front right corner using a T10 screw bit.

  3. Remove right side of the printer using a plastic opening tool or metal spudger.
    • Remove right side of the printer using a plastic opening tool or metal spudger.

  4. 안드로이드 수리 키트

    새 스크린 혹은 배터리는 단 하나의 키트로 충분합니다.

    지금 장보기

    안드로이드 수리 키트

    새 스크린 혹은 배터리는 단 하나의 키트로 충분합니다.

    지금 장보기
  5. Remove spring from the side of the print head rail using a metal spudger.
    • Remove spring from the side of the print head rail using a metal spudger.

  6. Push the metal rail the print head rests on inwards to remove it from its bearings. Push the metal rail the print head rests on inwards to remove it from its bearings.
    • Push the metal rail the print head rests on inwards to remove it from its bearings.

  7. Remove the belt from the back of the print head using a metal spudger.
    • Remove the belt from the back of the print head using a metal spudger.

  8. Remove the print head from the metal rail by sliding it off the rail.
    • Remove the print head from the metal rail by sliding it off the rail.

결론

To reassemble your device, follow these instructions in reverse order.

Ryan Steakley

회원 가입일: 2018년 01월 23일

766 Reputation

안내서 5개 작성하였습니다

Cal Poly, Team S1-G6, Livingston Winter 2018 Cal Poly, Team S1-G6, Livingston Winter 2018 회원

CPSU-LIVINGSTON-W18S1G6

4 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

View Statistics:

Past 24 Hours: 3

Past 7 Days: 9

Past 30 Days: 40

All Time: 1,144