주요 콘텐츠로 건너뛰기

HP Envy m6-k015dx Screen Replacement

필요한 것

  1. 주의: 1-6 단계들은 진행 중으로 표시된 안내서에서 제공되었습니다.

    • Shut down the computer

    • Remove all external devices

    • Unplug the AC adapter

    • Close the computer

    • Turn it upside down

    • Remove the 12 screws from the bottom.

    • Gently remove the service cover

    • Disconnect the battery cable from the motherboard.

    • Remove the 4 screws that hold the battery.

    • Gently lift the battery out of the computer.

  2. 주의: 7-9 단계들은 진행 중으로 표시된 안내서에서 제공되었습니다.

    • Remove the fan cable

    • Remove the 2 screws around the fan

    • Lift the fan up

  3. 주의: 10-14 단계들은 진행 중으로 표시된 안내서에서 제공되었습니다.

    • Unscrew the 3 screws that hold the card reader board to the system

    • Raise the card reader board from the system

    • Remove the four screws that pin down the hard drive

    • Disconnect the harddrive from its connector

    • Remove the harddrive

    • Only complete this step if your computer model has a solid state drive

    • Remove the two screws at the top of the solid state drive

    • Remove the solid state drive

    • Remove the thirteen screws around the keyboard bracket

    • Gently remove the keyboard bracket from its top

    • Remove the 4 screws on the touchpad's board

    • Gently lift the touchpad board from the side that the screws were on

    • Remove the touchpad board

    • Unscrew the four screws around the hinges

    • Pull the hinges upward

    • Lift the keyboard section of the computer up

    • Slide out the display

    • Remove the plastic bezel cover

    • Remove the ten screws holding the hinge to the display

    • Remove the four screws arouund the display

    • Remove the adhesive strip out of the true display

    • Disconnect the display's cable

    • Remove the display

결론

To reassemble your device, follow these instructions in reverse order.

Chuka

회원 가입일: 02/09/20

621 평판

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 68