주요 콘텐츠로 건너뛰기

소개

Reasons for replacing the SSD:

  • Upgrade
  • Broken/damaged
  1. Flip the laptop over.
    • Flip the laptop over.

    • Peel off the rubber strip closest to the hinges.

  2. Use a Phillips #1 screwdriver (PH1 bit) to remove the four 6.5mm screws that were underneath the rubber strip.
    • Use a Phillips #1 screwdriver (PH1 bit) to remove the four 6.5mm screws that were underneath the rubber strip.

  3. Use a Torx T5 screwdriver (T5 bit) to remove the three 5mm screws near the bottom edge of the laptop.
    • Use a Torx T5 screwdriver (T5 bit) to remove the three 5mm screws near the bottom edge of the laptop.

  4. Lift the back panel to remove it from the laptop.
    • Lift the back panel to remove it from the laptop.

    • Use an opening tool to pry open the back panel if it does not easily lift apart.

  5. Use a Phillips #1 screwdriver (PH1) to remove the seven 4mm screws indicated by the gray arrows on the battery. Use a Phillips #1 screwdriver (PH1) to remove the seven 4mm screws indicated by the gray arrows on the battery.
    • Use a Phillips #1 screwdriver (PH1) to remove the seven 4mm screws indicated by the gray arrows on the battery.

  6. Pull the battery from the connecting port and lift to remove it from the laptop.
    • Pull the battery from the connecting port and lift to remove it from the laptop.

  7. Use a Phillips #1 screwdriver to remove the single 4 mm screw securing the SSD.
    • Use a Phillips #1 screwdriver to remove the single 4 mm screw securing the SSD.

  8. Pull the SSD directly out its port.
    • Pull the SSD directly out its port.

결론

To reassemble your device, follow these instructions in reverse order.

Thomas Schemm

회원 가입일: 2022년 02월 11일

289 평판

안내서 3개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 6

30일 전: 27

전체 시간: 29