기기를 수리하세요 커뮤니티 상점

HP Envy x360 15-u473cl Fan Replacement

소개

The fan can become jammed with debris or stop working over time, causing the device to overheat.

필요한 것

  1. HP Envy x360 15-u473cl Fan Replacement, Battery: 1 단계, 이미지 1/2 HP Envy x360 15-u473cl Fan Replacement, Battery: 1 단계, 이미지 2/2

    • Power off your laptop before beginning disassembly.

    • Pry off the 2 rear rubber pads (closest to the laptop hinge) using the plastic opening tool to reveal two screws.

    • Remove the 2 anti-tamper proof covers using the spudger to reveal two screws.

    번역하기

  2. HP Envy x360 15-u473cl Fan Replacement: 2 단계, 이미지 1/1

    • Remove the fourteen 7mm screws using the Phillips #0 screwdriver from the bottom of the laptop.

    번역하기

  3. HP Envy x360 15-u473cl Fan Replacement: 3 단계, 이미지 1/2 HP Envy x360 15-u473cl Fan Replacement: 3 단계, 이미지 2/2

    • Turn the device right side up and open the lid.

    • Insert the plastic opening tool in between the keyboard plate and the base of laptop.

    • Run the tool along seem, prying up as you go.

    • Separate the keyboard plate from the base, lifting from the front.

    번역하기

  5. HP Envy x360 15-u473cl Fan Replacement: 4 단계, 이미지 1/1

    • There are 3 ribbon cables (black, white, and copper color) connecting the computer to the keyboard plate. Disconnect the 3 ribbon cables using the plastic opening tool by prying up the latches holding each cable in place.

    • Remove the keyboard plate from the device.

    번역하기

  6. HP Envy x360 15-u473cl Fan Replacement: 5 단계, 이미지 1/1

    • Remove the thick white ribbon cable covering the battery using the plastic opening tool by prying up the latches attaching each end.

    번역하기

  7. HP Envy x360 15-u473cl Fan Replacement: 6 단계, 이미지 1/1

    • Remove the three 4mm screws using the Phillips #0 screwdriver.

    번역하기

  8. HP Envy x360 15-u473cl Fan Replacement: 7 단계, 이미지 1/1

    • Disconnect the battery from the motherboard.

    • There may be tamper-proof tape holding the battery in place. Remove the tape if present.

    • Remove the battery from the device.

    번역하기

  9. HP Envy x360 15-u473cl Fan Replacement, Fan: 8 단계, 이미지 1/1

    • Remove the three 4mm screws using the Phillips #0 screwdriver from the device fan.

    번역하기

  10. HP Envy x360 15-u473cl Fan Replacement: 9 단계, 이미지 1/2 HP Envy x360 15-u473cl Fan Replacement: 9 단계, 이미지 2/2

    • Disconnect the fan from the motherboard using the spudger.

    • Remove the fan from the device.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 1명과 함께

Maximillian McDonald

회원 가입일: 01/13/18

760 평판

안내서 5개 작성하였습니다

배지: 10

배지 +7개 더

팀

Eastern Washington University, Team S1-G2, Ramos Winter 2018 Eastern Washington University, Team S1-G2, Ramos Winter 2018 회원

EWU-RAMOS-W18S1G2

5 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 7

전체 시간: 1,414