기기를 수리하세요 커뮤니티 상점

HP Envy x360 15m-cn0012dx Fan Replacement

소개

If your HP Envy x360 m Convertible 15m-cn0012dx is frequently overheating, use this guide to replace the fan.

A faulty fan does not effectively cool your computer.

Before starting, make sure all external connections are unplugged and the computer is turned off.

필요한 것

  1. HP Envy x360 15m-cn0012dx Fan Replacement, Fan: 1 단계, 이미지 1/2 HP Envy x360 15m-cn0012dx Fan Replacement, Fan: 1 단계, 이미지 2/2

    • Make sure the computer is turned off, and remove all cables.

    • Set the laptop face down.

    • Peel back the grey screw guards, along the top and bottom edge of the back case. It may be helpful to use a spudger to get started.

    • Peel slowly to avoid tearing the rubber covers.

    편집

  2. HP Envy x360 15m-cn0012dx Fan Replacement: 2 단계, 이미지 1/3 HP Envy x360 15m-cn0012dx Fan Replacement: 2 단계, 이미지 2/3 HP Envy x360 15m-cn0012dx Fan Replacement: 2 단계, 이미지 3/3

    • Using the Phillips #0 screwdriver, remove the seven 5mm screws from the back case.

    편집

  4. HP Envy x360 15m-cn0012dx Fan Replacement: 3 단계, 이미지 1/3 HP Envy x360 15m-cn0012dx Fan Replacement: 3 단계, 이미지 2/3 HP Envy x360 15m-cn0012dx Fan Replacement: 3 단계, 이미지 3/3

    • Pry open the back cover using the iFixit Opening Tool.

    • While using the tool, place a pick at each corner of the computer (be careful and do it slowly).

    • Once all the corners are slightly lifted, carefully pop off the back cover.

    편집

  5. HP Envy x360 15m-cn0012dx Fan Replacement: 4 단계, 이미지 1/3 HP Envy x360 15m-cn0012dx Fan Replacement: 4 단계, 이미지 2/3 HP Envy x360 15m-cn0012dx Fan Replacement: 4 단계, 이미지 3/3

    • Remove the two 4mm screws from the fan using a Phillips #0 screwdriver.

    • Peel the tape off of the multicolor cable bundle connecting the fan to the motherboard.

    • Use the iFixit opening tool to disconnect the connector.

    편집

  6. HP Envy x360 15m-cn0012dx Fan Replacement: 5 단계, 이미지 1/2 HP Envy x360 15m-cn0012dx Fan Replacement: 5 단계, 이미지 2/2

    • Peel back the tape from the heatsink.

    • Use the Phillips #0 screwdriver to remove the four captive screws from the heatsink.

    • These screws will stay inside the heatsink while it is removed, simply loosen them until they disengage from the case and the heatsink becomes loose.

    편집

  7. HP Envy x360 15m-cn0012dx Fan Replacement: 6 단계, 이미지 1/2 HP Envy x360 15m-cn0012dx Fan Replacement: 6 단계, 이미지 2/2

    • Unlatch the black cable from the plastic guides on the fan.

    • Lift the fan from the laptop case.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Ross Jeseritz

회원 가입일: 02/04/20

157 평판

안내서 1개 작성함

배지: 5

배지 +2개 더

팀

UW Stout, Team S1-G3, Schneider-Bateman Spring 2020 UW Stout, Team S1-G3, Schneider-Bateman Spring 2020 회원

UWSTOUT-SCHNEIDER-BATEMAN-S20S1G3

3 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 9

30일 전: 66

전체 시간: 2,710