주요 콘텐츠로 건너뛰기

HP Folio 13t-1000 Heatsink Replacement

필요한 것

  1. HP Folio 13t-1000 Heatsink Replacement, Keyboard: 1 단계, 이미지 1/2 HP Folio 13t-1000 Heatsink Replacement, Keyboard: 1 단계, 이미지 2/2
    • Use an antistatic wrist wrap, or periodically touch unpainted metal to minimize the risk of damaging the laptop by electrostatic shock.

    • Use a PH1 screw head to remove the 16, 6mm screws from the bottom case housing of the laptop.

  2. HP Folio 13t-1000 Heatsink Replacement: 2 단계, 이미지 1/3 HP Folio 13t-1000 Heatsink Replacement: 2 단계, 이미지 2/3 HP Folio 13t-1000 Heatsink Replacement: 2 단계, 이미지 3/3
    • This step requires unlocking the very fragile plastic clips along the frame; take care not to damage them.

    • Slide the spudger with a twisting motion along the entire perimeter of the laptop until the top cover is separated from the frame of the device.

  3. HP Folio 13t-1000 Heatsink Replacement: 3 단계, 이미지 1/1
    • Using the flat portion of the plastic spudger, push the corner of the black surface until the first clip unlocks.

    • The top right corner of the keyboard should now be sticking out slightly.

    • Repeat the same process for the top left corner.

  4. HP Folio 13t-1000 Heatsink Replacement: 4 단계, 이미지 1/2 HP Folio 13t-1000 Heatsink Replacement: 4 단계, 이미지 2/2
    • Slide the keyboard up and towards the screen just enough to separate the keyboard from the top cover.

  5. HP Folio 13t-1000 Heatsink Replacement: 5 단계, 이미지 1/3 HP Folio 13t-1000 Heatsink Replacement: 5 단계, 이미지 2/3 HP Folio 13t-1000 Heatsink Replacement: 5 단계, 이미지 3/3
    • To unlock the clamps connected to the motherboard, use your fingers or insert the pointed edge of the spudger between the first clamp and the cable.

    • Repeat the same process for the second clamp.

  6. HP Folio 13t-1000 Heatsink Replacement: 6 단계, 이미지 1/3 HP Folio 13t-1000 Heatsink Replacement: 6 단계, 이미지 2/3 HP Folio 13t-1000 Heatsink Replacement: 6 단계, 이미지 3/3
    • Remove the keyboard from the laptop.

  7. HP Folio 13t-1000 Heatsink Replacement, Top Hardware Cover: 7 단계, 이미지 1/3 HP Folio 13t-1000 Heatsink Replacement, Top Hardware Cover: 7 단계, 이미지 2/3 HP Folio 13t-1000 Heatsink Replacement, Top Hardware Cover: 7 단계, 이미지 3/3
    • Place your finger between one of the plastic clamps and the cable and apply a slight leveraging force until the clamp pops up.

    • Do the same for the second connection.

  8. HP Folio 13t-1000 Heatsink Replacement: 8 단계, 이미지 1/2 HP Folio 13t-1000 Heatsink Replacement: 8 단계, 이미지 2/2
    • Remove the top hardware cover.

  9. HP Folio 13t-1000 Heatsink Replacement, Heat Sink: 9 단계, 이미지 1/2 HP Folio 13t-1000 Heatsink Replacement, Heat Sink: 9 단계, 이미지 2/2
    • Use a PH1 screw head to take out the four, 2mm screws.

  10. HP Folio 13t-1000 Heatsink Replacement: 10 단계, 이미지 1/3 HP Folio 13t-1000 Heatsink Replacement: 10 단계, 이미지 2/3 HP Folio 13t-1000 Heatsink Replacement: 10 단계, 이미지 3/3
    • Remove the heatsink with you fingers and replace it with a new heatsink.

결론

To reassemble your device, follow these instructions in reverse order.

Cody Badchkam

회원 가입일: 09/28/16

64 평판

안내서 4개 작성하였습니다

USF Tampa, Team 1-2, Cagle Fall 2016 USF Tampa, Team 1-2, Cagle Fall 2016 회원

USFT-CAGLE-F16S1G2

4 회원들

안내서 7개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 3

전체 시간: 222