주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

소개

This guide will walk you through the process of detaching the keyboard.

This is the first step to opening the HP Folio Laptop and is necessary to replace any defective hardware.

For safety precautions, it is recommended to wear a anti-static wrist strap or find a way to ground yourself to prevent electrostatic shock to the laptop.

  1. Use an antistatic wrist wrap, or periodically touch unpainted metal to minimize the risk of damaging the laptop by electrostatic shock. Use a PH1 screw head to remove the 16, 6mm screws from the bottom case housing of the laptop.
    • Use an antistatic wrist wrap, or periodically touch unpainted metal to minimize the risk of damaging the laptop by electrostatic shock.

    • Use a PH1 screw head to remove the 16, 6mm screws from the bottom case housing of the laptop.

  2. This step requires unlocking the very fragile plastic clips along the frame; take care not to damage them. Slide the spudger with a twisting motion along the entire perimeter of the laptop until the top cover is separated from the frame of the device. Slide the spudger with a twisting motion along the entire perimeter of the laptop until the top cover is separated from the frame of the device.
    • This step requires unlocking the very fragile plastic clips along the frame; take care not to damage them.

    • Slide the spudger with a twisting motion along the entire perimeter of the laptop until the top cover is separated from the frame of the device.

  3. Manta(만타) 드라이버 키트

    112 bits for every fix.

    Upgrade Your Toolbox

    Manta(만타) 드라이버 키트

    Upgrade Your Toolbox
  4. Using the flat portion of the plastic spudger, push the corner of the black surface until the first clip unlocks.
    • Using the flat portion of the plastic spudger, push the corner of the black surface until the first clip unlocks.

    • The top right corner of the keyboard should now be sticking out slightly.

    • Repeat the same process for the top left corner.

  5. Slide the keyboard up and towards the screen just enough to separate the keyboard from the top cover. Slide the keyboard up and towards the screen just enough to separate the keyboard from the top cover.
    • Slide the keyboard up and towards the screen just enough to separate the keyboard from the top cover.

  6. To unlock the clamps connected to the motherboard, use your fingers or insert the pointed edge of the spudger between the first clamp and the cable. Repeat the same process for the second clamp. Repeat the same process for the second clamp.
    • To unlock the clamps connected to the motherboard, use your fingers or insert the pointed edge of the spudger between the first clamp and the cable.

    • Repeat the same process for the second clamp.

  7. Remove the keyboard from the laptop. Remove the keyboard from the laptop. Remove the keyboard from the laptop.
    • Remove the keyboard from the laptop.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Cody Badchkam

회원 가입일: 2016년 09월 28일

37 평판

안내서 4개 작성하였습니다

USF Tampa, Team 1-2, Cagle Fall 2016 USF Tampa, Team 1-2, Cagle Fall 2016 회원

USFT-CAGLE-F16S1G2

4 회원들

안내서 7개 작성하였습니다

Awsome Thanks! had my keyboard flooded with some cola :( .. Fixed it !

Matthijs Aveskamp - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 8

전체 시간: 523