주요 콘텐츠로 건너뛰기

소개

This guide will show users how to replace the keyboard for an HPG62-347NR laptop. You will need a Phillips #1 screwdriver and a prying tool.

부품

지정된 부품이 없습니다.

  1. Make sure the device is turned off before removing the battery to avoid loss or corruption of files.
    • Make sure the device is turned off before removing the battery to avoid loss or corruption of files.

    • Turn the device over so the bottom is facing up.

    • Slide the battery release to the left until you hear a click.

    • Once you hear a click, the battery will have been released from the battery compartment.

  2. Remove the battery, carefully, from the compartment.
    • Remove the battery, carefully, from the compartment.

  3. Find the hard drive compartment with two Phillips head screws. Use the PH1 screwdriver to loosen and remove both screws.
    • Find the hard drive compartment with two Phillips head screws.

    • Use the PH1 screwdriver to loosen and remove both screws.

    • Gently remove the hard drive compartment.

  4. Locate the three Phillips head screws on the compartment with the wifi and keyboard logos. Using the Phillips #1 screwdriver, remove the three screws.
    • Locate the three Phillips head screws on the compartment with the wifi and keyboard logos.

    • Using the Phillips #1 screwdriver, remove the three screws.

  5. Locate the two keyboard logos on back of the computer. Find the Phillips head screws in the hole next to the logo.
    • Locate the two keyboard logos on back of the computer.

    • Find the Phillips head screws in the hole next to the logo.

    • Remove the two screws using a Phillips #1 screwdriver.

  6. In the battery compartment, locate the three keyboard logos. Find the Phillips head screws next to each logo.
    • In the battery compartment, locate the three keyboard logos.

    • Find the Phillips head screws next to each logo.

    • Remove the three screws using the Phillips #1 screwdriver.

  7. Place the plastic opening tool between the keyboard and the motherboard. Gently pry the entire keyboard up and away from the laptop's motherboard.
    • Place the plastic opening tool between the keyboard and the motherboard.

    • Gently pry the entire keyboard up and away from the laptop's motherboard.

    • Once you have part of the keyboard separated, run your fingers around the edge of the keyboard to separate the entire thing.

결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

McKenzi Morris

회원 가입일: 2016년 10월 10일

487 평판

안내서 3개 작성하였습니다

Texas Tech, Team 6-1, Bennett Fall 2016 Texas Tech, Team 6-1, Bennett Fall 2016 회원

TTU-BENNETT-F16S6G1

3 회원들

안내서 3개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 3

7일 전: 7

30일 전: 22

전체 시간: 2,130