주요 콘텐츠로 건너뛰기

소개

A brief guide on how to remove the hard drive from an HP G62-340.

부품

지정된 부품이 없습니다.

  1. Turn off the computer and disconnect the charging cable from the computer.
    • Turn off the computer and disconnect the charging cable from the computer.

    • Turn your laptop over and locate the hard drive module compartment.

  2. Use a screwdriver to loosen the two Phillips PM2.5x6.0 captive screws on the hard drive cover.
    • Use a screwdriver to loosen the two Phillips PM2.5x6.0 captive screws on the hard drive cover.

    • Lift the left side of the hard drive cover and remove the cover.

  3. Use a screwdriver to remove the three Phillips PM3.0x4.0 screws on the hard drive. Use a screwdriver to remove the three Phillips PM3.0x4.0 screws on the hard drive. Use a screwdriver to remove the three Phillips PM3.0x4.0 screws on the hard drive.
    • Use a screwdriver to remove the three Phillips PM3.0x4.0 screws on the hard drive.

  4. Disconnect the hard drive cable from the system board and gently remove the hard drive.
    • Disconnect the hard drive cable from the system board and gently remove the hard drive.

  5. Remove the 4 screws from the hard drive bracket and separate it from the hard drive. Remove the 4 screws from the hard drive bracket and separate it from the hard drive. Remove the 4 screws from the hard drive bracket and separate it from the hard drive.
    • Remove the 4 screws from the hard drive bracket and separate it from the hard drive.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Yun Yang

회원 가입일: 2017년 10월 19일

321 평판

안내서 3개 작성하였습니다

UMass Dartmouth, Team S1-G4, Isaacson Fall 2017 UMass Dartmouth, Team S1-G4, Isaacson Fall 2017 회원

UMASSD-ISAACSON-F17S1G4

3 회원들

안내서 3개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 11

전체 시간: 986