기기를 수리하세요 커뮤니티 상점

HP Mini 1000 WWAN Board Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

소개

This guide is used as a prereq to other guides. (1st for motherboard)

필요한 것

  1. HP Mini 1000 WWAN Board Replacement, WWAN Board: 1 단계, 이미지 1/1

    • If present, carefully peel the piece of tape covering the WWAN board.

    번역하기

  2. HP Mini 1000 WWAN Board Replacement: 2 단계, 이미지 1/2 HP Mini 1000 WWAN Board Replacement: 2 단계, 이미지 2/2

    • Pry the WWAN antenna connectors (2 total) up off the WWAN board.

    • During reassembly, remember to correctly connect the antenna cables to their respective terminals. The red labeled antenna is connected to the "MAIN" terminal and the blue labeled antenna is connected to the "AUX" terminal.

    번역하기

  4. HP Mini 1000 WWAN Board Replacement: 3 단계, 이미지 1/3 HP Mini 1000 WWAN Board Replacement: 3 단계, 이미지 2/3 HP Mini 1000 WWAN Board Replacement: 3 단계, 이미지 3/3

    • Remove the single 3 mm Phillips screw securing the WWAN metal bracket and WWAN board to the motherboard.

    • During reassembly, before securing the WWAN board to the upper case, be sure the metal bracket is correctly placed (as highlighted in the second picture).

    • Be cautious of the metal bracket's displacement. It can easily become lost during disassembly.

    번역하기

  5. HP Mini 1000 WWAN Board Replacement: 4 단계, 이미지 1/2 HP Mini 1000 WWAN Board Replacement: 4 단계, 이미지 2/2

    • Upon removing the Phillips screw that secures the WWAN board to the motherboard, the WWAN board should pop up from its left side.

    • Grasp the WWAN board and pull it straight out of its socket on the motherboard.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 4명과 함께

Walter Galan

694,676 평판

안내서 1,203개 작성하였습니다

배지: 54

배지 +51개 더

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 48