기기를 수리하세요 커뮤니티 상점

HP Mobile Thin Client mt41 Fan Replacement

필요한 것

  1. HP Mobile Thin Client mt41 Fan Replacement, Back Cover: 1 단계, 이미지 1/2 HP Mobile Thin Client mt41 Fan Replacement, Back Cover: 1 단계, 이미지 2/2

    • Remove the nine screws that keep the back cover secured using the T5 Torx screwdriver.

    편집

  2. HP Mobile Thin Client mt41 Fan Replacement: 2 단계, 이미지 1/2 HP Mobile Thin Client mt41 Fan Replacement: 2 단계, 이미지 2/2

    • Remove the middle plate using the iFixit opening tool.

    • This may require a bit of force. If it is not coming out try the other side.

    편집

  3. HP Mobile Thin Client mt41 Fan Replacement: 3 단계, 이미지 1/1

    • Pop the back cover off from its latches by separating the two parts along their seam using the iFixit opening tool.

    • Be gentle; the plastic can crack.

    편집

  5. HP Mobile Thin Client mt41 Fan Replacement: 4 단계, 이미지 1/1

    • Lift the back cover once all corners are unclasped from their latches.

    • Lifting the cover should not require much force.

    편집

  6. HP Mobile Thin Client mt41 Fan Replacement, Fan: 5 단계, 이미지 1/2 HP Mobile Thin Client mt41 Fan Replacement, Fan: 5 단계, 이미지 2/2

    • Using a J1 head for your screwdriver, remove the 4 surrounding screws.

    편집

  7. HP Mobile Thin Client mt41 Fan Replacement: 6 단계, 이미지 1/1

    • Keep your screws close by, and slowly remove the CPU fan.

    편집

  8. HP Mobile Thin Client mt41 Fan Replacement: 7 단계, 이미지 1/1

    • Be mindful of wires, the final step is to unplug the fan from the motherboard, at the base of red and blue wires.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 1명과 함께

William Rapp

회원 가입일: 02/08/18

171 평판

안내서 1개 작성함

배지: 4

+1개 배지 추가

팀

University of North Texas, Team S2-G5, Thomas Spring 2018 University of North Texas, Team S2-G5, Thomas Spring 2018 회원

UNT-THOMAS-S18S2G5

5 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 7

전체 시간: 354