주요 콘텐츠로 건너뛰기

HP Officejet Pro 6230 Printer Power Adaptor Replacement

필요한 것

  1. HP Officejet Pro 6230 Printer Power Adaptor Replacement, Power Adapter: 1 단계, 이미지 1/2 HP Officejet Pro 6230 Printer Power Adaptor Replacement, Power Adapter: 1 단계, 이미지 2/2
    • Turn the printer around and locate the back panel for power.

    • Note: If you are unsure where the panel is located, look in the back right corner. The panel has “100-240V~50/60 Hz 700 mA” inscribed on it.

  2. HP Officejet Pro 6230 Printer Power Adaptor Replacement: 2 단계, 이미지 1/1
    • Unscrew the 0.8 mm screw holding in the panel using a T6 Torx screwdriver.

    • Note: Rotate the screw counterclockwise to loosen. Keep it in a safe place.

  3. HP Officejet Pro 6230 Printer Power Adaptor Replacement: 3 단계, 이미지 1/1
    • Remove the HP AC Power Adapter from the slot.

  4. HP Officejet Pro 6230 Printer Power Adaptor Replacement: 4 단계, 이미지 1/1
    • Locate the blue/green/red wire attached to the back of the adapter.

  5. HP Officejet Pro 6230 Printer Power Adaptor Replacement: 5 단계, 이미지 1/1
    • Unplug the current adapter from the wire.

    • Grasp the end of the connector, not the wires, to pull it out.

  6. HP Officejet Pro 6230 Printer Power Adaptor Replacement: 6 단계, 이미지 1/1
    • Affix the new adapter to the same wire.

결론

To reassemble your device, follow these instructions in reverse order.

Natalie Carmona

회원 가입일: 01/28/17

101 평판

안내서 1개 작성함

USF Sarasota-Manatee, Team 1-1, Stewart Spring 2017 USF Sarasota-Manatee, Team 1-1, Stewart Spring 2017 회원

USFSM-STEWART-S17S1G1

19 회원들

안내서 20개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 4

30일 전: 9

전체 시간: 1,115