주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

This guide will teach you how to remove the Cover on your HP Officejet Pro 6835 or 6830 to reach the main components.

부품

지정된 부품이 없습니다.

  1. Open the main lid as far as it will go.
    • Open the main lid as far as it will go.

    • Use a plastic opening tool to gently pry off the hinge on the right side by pushing it to the left and off the hook.

    • Open the lid further.

  2. Use a T9 torx screwdriver to remove a total of ten (10) 12mm screws from the main cover by turning the screwdriver counterclockwise. The two screws above the screen assembly are deep so you may need a long screwdriver. The two screws above the screen assembly are deep so you may need a long screwdriver.
    • Use a T9 torx screwdriver to remove a total of ten (10) 12mm screws from the main cover by turning the screwdriver counterclockwise.

    • The two screws above the screen assembly are deep so you may need a long screwdriver.

  3. Grab the main cover and lift it up slightly.
    • Grab the main cover and lift it up slightly.

    • Do not pull too hard—there is a cable connecting the cover to the printer.

  4. Grab the base of the white ribbon cable connecting the cover to the base of the printer and pull it out. Grab the base of the white ribbon cable connecting the cover to the base of the printer and pull it out.
    • Grab the base of the white ribbon cable connecting the cover to the base of the printer and pull it out.

결론

To reassemble your device, follow these instructions in reverse order.

Jake Park

회원 가입일: 2018년 01월 24일

427 평판

안내서 2개 작성하였습니다

Cal Poly, Team S2-G4, Livingston Winter 2018 Cal Poly, Team S2-G4, Livingston Winter 2018 회원

CPSU-LIVINGSTON-W18S2G4

4 회원들

안내서 8개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 56