이 버전에는 잘못된 편집 사항이 있을 수 있습니다. 최신 확인된 스냅샷으로 전환하십시오.
필요한 것
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Remove the two 11.6 mm T9 screws from the right side of the back of the printer.
-
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Pull down the front panel to expose the screws on the front.
-
Remove the one 11.6 mm T9 screw on the left side of the front face.
-
거의 끝나갑니다!
결승점