HP Pavilion 15-AB153NR Cooling Fan Replacement

소개

This replacement will require the use of prying tools and screwdrivers. It can completed with moderate difficulty. Make sure you have a moderate chunk of time to complete this task. You will need a clear work surface. Replacing the cooling fan can often solve problems like overheating.

필요한 것

1 단계 Battery

HP Pavilion 15-AB153NR Cooling Fan Replacement, Battery: 1 단계, 이미지 1/1

Ensure computer is turned off and unplugged.
Slide the battery lock latch on the left to unlock. Slide from left to right to unlock.

편집

2 단계

Slide the battery release latch on the right with continuous force from right to left.
Once battery pops, you may release latch.

편집

3 단계

Grab the battery, rotating upwards and away from you. This will remove the battery.

편집

4 단계 CD/DVD Drive

HP Pavilion 15-AB153NR Cooling Fan Replacement, CD/DVD Drive: 4 단계, 이미지 1/1

Make sure computer is powered off and unplugged.
Flip computer over so that the bottom is facing the ceiling and the hinges are farthest from you.

편집

5 단계

Using the Phillips #000 screwdriver, remove the 7 mm screw on the middle right.
There is an icon that looks like a CD stamped into the back panel near this screw.

편집

6 단계

Slide the drive out from the right side of the device.

편집

7 단계 Bottom Case Cover

HP Pavilion 15-AB153NR Cooling Fan Replacement, Bottom Case Cover: 7 단계, 이미지 1/1

Using the Phillips #1 screwdriver, remove the two 12mm screws located on the hinge covers.

편집

8 단계

Lift the corner covers off of the computer using a prying tool.

편집

9 단계

Remove the six 6.5mm screws using a Phillips #1 screwdriver that are located near the top of the laptop.

편집

10 단계

Remove the remaining seven 6.5mm screws using a Phillips #1 screwdriver that are securing the back cover.

편집

11 단계

Use the Phillips #0 screwdriver to remove the two 2mm screws.

편집

12 단계

HP Pavilion 15-AB153NR Cooling Fan Replacement: 12 단계, 이미지 3/3

Use prying tools to pry the covers off of the screwholes.
Using the Phillips #1 screwdriver, remove the two 6.5mm screws.

편집

13 단계

Be mindful of sharp edges on computer while using prying tools.
Flip computer over and open so that the screen is facing you.
Starting at the bottom right corner, insert the prying tool and lift upwards to loosen the back panel.
Continue down all sides and corners of the device.