메인 콘텐츠로 스킵하기

소개

This replacement guide will show how to replace the fan inside of a HP Pavilion 15-b109wm. This process will take between 30-45 minutes, if done correctly. Remember to take your time and do the steps correctly since you are working near the motherboard.

부품

지정된 부품이 없습니다.

  1. Power off the device and disconnect from any power source.
    • Power off the device and disconnect from any power source.

  2. Turn the device upside down and ensure the back of the device is facing you.
    • Turn the device upside down and ensure the back of the device is facing you.

  3. Push both buttons towards one another simultaneously. The battery slightly pops out. Push both buttons towards one another simultaneously. The battery slightly pops out. Push both buttons towards one another simultaneously. The battery slightly pops out.
    • Push both buttons towards one another simultaneously. The battery slightly pops out.

  4. Pull out the battery from the device's battery slot. Pull out the battery from the device's battery slot. Pull out the battery from the device's battery slot.
    • Pull out the battery from the device's battery slot.

  5. Use JIS #1 screwdriver to remove the eleven 6 mm screws. Use JIS #1 screwdriver to remove the eleven 6 mm screws.
    • Use JIS #1 screwdriver to remove the eleven 6 mm screws.

  6. 맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now

    맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now
  7. Locate the two screw holes that allow access to removing the keyboard.
    • Locate the two screw holes that allow access to removing the keyboard.

    • There is a keyboard sign beside both keyboard access holes.

  8. Turn the device onto its side.
    • Turn the device onto its side.

    • Using a heavy duty spudger, gently disengage the keyboard.

  9. Using a plastic opening tool, release the keyboard clips. Using a plastic opening tool, release the keyboard clips.
    • Using a plastic opening tool, release the keyboard clips.

  10. Tilt the keyboard to expose the Zero Insertion Force connector to which the keyboard cable is attached.
    • Tilt the keyboard to expose the Zero Insertion Force connector to which the keyboard cable is attached.

  11. Disconnect the keyboard cable from the motherboard by detaching the Zero Insertion Force connector. To detach the connector, release by lifting the black plastic tab up. To detach the connector, release by lifting the black plastic tab up.
    • Disconnect the keyboard cable from the motherboard by detaching the Zero Insertion Force connector.

    • To detach the connector, release by lifting the black plastic tab up.

  12. Using a JIS #1 screwdriver, remove the five 5mm screws. Detach the power button cable. Detach the touch pad cable.
    • Using a JIS #1 screwdriver, remove the five 5mm screws.

    • Detach the power button cable.

    • Detach the touch pad cable.

  13. Using a plastic opening tool, pry open the top cover. Unscrew the two 5 mm screws using a JIS #1 screwdriver. Gently, pull to detach the fan cable.
    • Using a plastic opening tool, pry open the top cover.

    • Unscrew the two 5 mm screws using a JIS #1 screwdriver.

    • Gently, pull to detach the fan cable.

    • Be careful so you do not damage the motherboard.

  14. Carefully remove the fan from its slot.
    • Carefully remove the fan from its slot.

결론

To reassemble your device, follow these instructions in reverse order.

Stephen Gacioch

회원 가입일: 2018년 10월 26일

437 평판

안내서 3개 작성하였습니다

UMass Dartmouth, Team S2-G2, Peak Fall 2018 UMass Dartmouth, Team S2-G2, Peak Fall 2018 회원

UMASSD-PEAK-F18S2G2

3 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 2

지난 30일: 5

전체 시간: 124