주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

소개

Your stock hard drive could be too slow for your operating software. Use this guide to replace your current hard drive with one of larger capacity.

  1. Turn computer off. Unplug the computer from the power source. Remove the 4 computer feet. (Our device didn't have these; they can be taken off with a plastic spudger.)
    • Turn computer off. Unplug the computer from the power source.

    • Remove the 4 computer feet. (Our device didn't have these; they can be taken off with a plastic spudger.)

    • Remove the two screw cover strips.

    • Remove the two screw cover plugs.

    • Unscrew all 12 screws (size: Phillips M2.5×7.0 ) from the bottom of the computer.

  2. Turn the computer over to the front. Open the laptop. Using plastic pry tool, pry up the keyboard cover near the hinge on both the right and left side and work your way toward the touchpad.
    • Turn the computer over to the front.

    • Open the laptop.

    • Using plastic pry tool, pry up the keyboard cover near the hinge on both the right and left side and work your way toward the touchpad.

  3. Remove the blue connection cable gently.
    • Remove the blue connection cable gently.

    • Lift the keyboard cover off.

  4. Remove the hard drive from the laptop.
    • Remove the hard drive from the laptop.

    • Our device did not contain a hard drive.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Hannah Paine

회원 가입일: 2017년 06월 28일

279 평판

안내서 2개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 13

7일 전: 109

30일 전: 426

전체 시간: 5,879