주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

소개

If the screen needs to be replaced on your HP Pavilion 17-e146us, follow this guide. The screen is undoubtedly one of the most important parts of the device. It is required in order to see what is occurring on the device. A broken screen makes it impossible to use the device. This guide will show how to replace a broken screen with a new screen. Possible hazard is damage to the motherboard; therefore, remove with caution in order to avoid damaging the motherboard. For more information on possible causes for a faulty screen please check out our troubleshooting page.

  1. Open laptop Remove two stickers on bottom corners of the screen to reveal two screws.
    • Open laptop

    • Remove two stickers on bottom corners of the screen to reveal two screws.

  2. Remove a 5.0  mm screw in the bottom left and right hand corner of the screen using a Phillips #0 screwdriver.
    • Remove a 5.0 mm screw in the bottom left and right hand corner of the screen using a Phillips #0 screwdriver.

  3. Essential Electronics Toolkit

    Small Toolkit. Big Possibilities.

    Shop Toolkits

    Essential
    Electronics
    Toolkit

    Shop Toolkits
  4. Place a spudger or opening tool between the screen screen and the plastic layer. Separate the  plastic layer covering the edges of the screen.
    • Place a spudger or opening tool between the screen screen and the plastic layer.

    • Separate the plastic layer covering the edges of the screen.

    • This piece includes the silver covers for screen holder that rotates the screen.

  5. Remove four 4.00  mm screws at top and bottom corners of laptop using a Phillips #0 screwdriver.
    • Remove four 4.00 mm screws at top and bottom corners of laptop using a Phillips #0 screwdriver.

    • This will separate the back cover from the screen.

    • Be careful not to let the frame fall

  6. Remove four 3.00 mm screws on side of frame to release the screen from the frame. There are two screws on the right side and two screws on the left side
    • Remove four 3.00 mm screws on side of frame to release the screen from the frame.

    • There are two screws on the right side and two screws on the left side

    • This will release the screen from the frame. Be sure not to let it fall out because it could damage the motherboard attachments.

  7. Remove the old screen. The screen is connected to the motherboard. Be careful to not destroy the tape connection or break the motherboard.
    • Remove the old screen.

    • The screen is connected to the motherboard. Be careful to not destroy the tape connection or break the motherboard.

결론

To reassemble your device, follow these instructions in reverse order.

Emma Neumann

회원 가입일: 2019년 09월 04일

621 평판

안내서 5개 작성하였습니다

University of Alabama, Team S2-G7, Bedsole Fall 2019 University of Alabama, Team S2-G7, Bedsole Fall 2019 회원

UA-BEDSOLE-F19S2G7

3 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 3

전체 시간: 62