소개

In this guide, you will learn how to replace your RAM.

  1. Shut down the computer and unplug it from the outlet.
    • Shut down the computer and unplug it from the outlet.

    • All screws removed in this guide will require a Phillips #00 screwdriver.

    댓글 쓰기

  2. Turn the computer upside down.
    • Turn the computer upside down.

    댓글 쓰기

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Loosen the three screws from the memory module compartment cover

    • Screws will not come all the way out.

    댓글 쓰기

    • Remove the memory module compartment cover.

    댓글 쓰기

    • Remove the first memory module by spreading apart the two silver retaining tabs, using your thumb and index finger.

    • Pull and lift the green memory module upward at a 45-degree angle, and then pull the memory module out of the computer.

    • If you are replacing both memory cards, repeat this step with the bottom memory card.

    댓글 쓰기

    • To replace the memory card, insert the card at a 45-degree angle, then push into slot.

    • Push down gently so the silver retaining tabs click back into place.

    • If you are replacing both memory cards, replace the bottom card (closest to the system board) first.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

Jaime

회원 가입일: 2014년 01월 23일

464 평판

안내서 1개 작성함

New Mexico State, Team 1-3, Sheppard Spring 2014 New Mexico State, Team 1-3, Sheppard Spring 2014 회원

NMSU-SHEPPARD-S14S1G3

4 회원들

안내서 4개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 2

지난 30일: 19

전체 시간: 1,643