소개

Replace the wireless card in your HP Pavilion dv6000.

Lay the laptop on a flat surface, battery side up.
  • Lay the laptop on a flat surface, battery side up.

  • Remove the two screws securing the RAM shield to the lower case.

  • The screws will remain captive within the shield.

  • Lift and remove the RAM shield up from the lower case.

댓글 쓰기

Use a pair of tweezers to disconnect both antennas from their sockets on the wireless card. Be careful to pull on the contacts and not the wires. The crimps used to hold them to the wires are delicate.
  • Use a pair of tweezers to disconnect both antennas from their sockets on the wireless card.

  • Be careful to pull on the contacts and not the wires. The crimps used to hold them to the wires are delicate.

댓글 쓰기

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Remove the two 3.7 mm Phillips screws securing the wireless card to the motherboard.
  • Remove the two 3.7 mm Phillips screws securing the wireless card to the motherboard.

  • Upon removing the Phillips screws that secures the wireless card to the motherboard, the wireless card board should pop up from its top side.

  • Grasp the wireless card and pull it straight out of its socket on the motherboard.

댓글 쓰기

Wireless card remains.
  • Wireless card remains.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 4명이 해당 안내서를 완성하였습니다.

Ben Hirsch

회원 가입일: 2010년 10월 05일

3,568 평판

안내서 10개 작성하였습니다

Cal Poly, Team 21-33, Regan Fall 2010 Cal Poly, Team 21-33, Regan Fall 2010 회원

CPSU-REGAN-F10S21G33

4 회원들

안내서 10개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 2

지난 7일: 25

지난 30일: 89

전체 시간: 24,669