기기를 수리하세요 커뮤니티 상점

HP Pavilion g7-2275dx RAM Replacement

소개

One of the easiest ways to speed up your computer is to add more RAM. This guide will walk you through how to replace the RAM in your laptop.

Be sure that you buy the right type of RAM. The g7-2275 dx supports two stick of RAM, up to 8 GB. It takes 204-pin SODIMM DDR3 PC3-10600 1333MHz RAM.

For more information about RAM, check out iFixit's RAM page

필요한 것

  1. HP Pavilion g7-2275dx RAM Replacement, Battery: 1 단계, 이미지 1/1

    • Working on your device while it is turned on may result in electric shock. Make sure to shut down and unplug your device before you begin.

    • Flip your device over so the bottom panel is facing up.

    편집

  2. HP Pavilion g7-2275dx RAM Replacement: 2 단계, 이미지 1/1

    • The battery is held in by a latch in the front and tabs in the back.

    • Slide the lock switch left, towards the center of the computer.

    • Lift up the battery, rotating it up and away from you, then pull it out.

    • To put the battery back in, line it up with the battery bay and the holes for the tabs. Then let the battery rotate towards you and press down until the latch engages and you hear a click.

    편집

  4. HP Pavilion g7-2275dx RAM Replacement, Disassembling HP Pavilion g7-2275dx Back Panel: 3 단계, 이미지 1/1

    • Unscrew one Phillips #1 screw from the back panel.

    • The screw is on a spring and attached to the panel. It will pop up, but will not separate from the back panel.

    편집

  5. HP Pavilion g7-2275dx RAM Replacement: 4 단계, 이미지 1/2 HP Pavilion g7-2275dx RAM Replacement: 4 단계, 이미지 2/2

    • Slide the back panel down and pull it up.

    편집

  6. HP Pavilion g7-2275dx RAM Replacement, RAM: 5 단계, 이미지 1/2 HP Pavilion g7-2275dx RAM Replacement, RAM: 5 단계, 이미지 2/2

    • Use your fingers, plastic opening tools, or pliers to pull the silver brackets away from the RAM.

    • The RAM should pop up to a 35 degree angle.

    편집

  7. HP Pavilion g7-2275dx RAM Replacement: 6 단계, 이미지 1/2 HP Pavilion g7-2275dx RAM Replacement: 6 단계, 이미지 2/2

    • Gently pull the RAM straight out in the direction it currently is orientated.

    • When inserting new RAM, place the RAM in the black housing at a 35 degree angle (it will fit loosely), then push down until it clicks into the silver brackets.

    • This computer supports two sticks of RAM. To add a second stick, repeat the above step with the upper black housing. (Ensure that you have the correct size and type of RAM before trying to add it).

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 5명과 함께

John Sutton

회원 가입일: 04/24/14

1,566 평판

안내서 8개 작성하였습니다

배지: 17

배지 +14개 더

팀

Cal Poly, Team 11-51, Amido Spring 2014 Cal Poly, Team 11-51, Amido Spring 2014 회원

CPSU-AMIDO-S14S11G51

4 회원들

안내서 21개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 5

전체 시간: 1,389