기기를 수리하세요 커뮤니티 상점

HP Photosmart Plus B210a Printhead Replacement

소개

Guide on how to replace the HP B210a printhead.

  1. HP Photosmart Plus B210a Printhead Replacement, Ink tank removal: 1 단계, 이미지 1/3 HP Photosmart Plus B210a Printhead Replacement, Ink tank removal: 1 단계, 이미지 2/3 HP Photosmart Plus B210a Printhead Replacement, Ink tank removal: 1 단계, 이미지 3/3

    • Remove the ink cartridges from the printer. Install the shipping caps or put the ink cartridges in a plastic bag.

    편집

  3. HP Photosmart Plus B210a Printhead Replacement, Remove the printhead (See calibration warning): 2 단계, 이미지 1/3 HP Photosmart Plus B210a Printhead Replacement, Remove the printhead (See calibration warning): 2 단계, 이미지 2/3 HP Photosmart Plus B210a Printhead Replacement, Remove the printhead (See calibration warning): 2 단계, 이미지 3/3

    • If the printhead is being removed for cleaning and is plugged in, the calibration data may be erased. Verify the printer is unplugged BEFORE REMOVING the printhead!

    • When the printer is unplugged, lift the lever up and remove the printhead.

    • Remove the printhead as shown. IMPORTANT: Leave the scanner lid open, or put a note near the printer.

    편집

  4. HP Photosmart Plus B210a Printhead Replacement, Clean the printer contacts: 3 단계, 이미지 1/2 HP Photosmart Plus B210a Printhead Replacement, Clean the printer contacts: 3 단계, 이미지 2/2

    • Failure to clean this area may result in an Ink System Failure warning. If you are cleaning the printhead, this error will destroy your existing calibration!

    • Using an alcohol wipe, clean the printhead interface on the printer before installing the replacement part to avoid any errors like Ink System Failure.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

Nick

회원 가입일: 11/10/09

89,943 평판

안내서 52개 작성하였습니다

배지: 55

배지 +52개 더

팀

Master Techs Master Techs 회원

Community

321 회원들

안내서 1,525개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 4

전체 시간: 17