기기를 수리하세요 커뮤니티 상점

HP Photosmart Premium C309g Scanner Glass Replacement

소개

If the scanner glass cracks or breaks, it will need to be replaced in it's entirety. The glass is visible when you open the top of the printer so you will be able to tell if it needs replacement without taking the printer apart.

필요한 것

  1. HP Photosmart Premium C309g Scanner Glass Replacement, Scanner Glass: 1 단계, 이미지 1/1

    • Open the top of the printer. The printer should appear as shown.

    편집

  2. HP Photosmart Premium C309g Scanner Glass Replacement: 2 단계, 이미지 1/2 HP Photosmart Premium C309g Scanner Glass Replacement: 2 단계, 이미지 2/2

    • Use the blue plastic opening tool to pry the trim pieces all the way around the printer.

    • Loosen the pieces around the edges before pulling to remove from the printer.

    • Pull the (4) trim pieces off and set them aside.

    편집

  3. HP Photosmart Premium C309g Scanner Glass Replacement: 3 단계, 이미지 1/2 HP Photosmart Premium C309g Scanner Glass Replacement: 3 단계, 이미지 2/2

    • Using the blue plastic opening tool, pull from the middle and then slide back to remove the side panels.

    • The side trim pieces need to be removed before the front trim pieces.

    편집

  5. HP Photosmart Premium C309g Scanner Glass Replacement: 4 단계, 이미지 1/1

    • Using the T9 Torx Security screwdriver bit, unscrew the five 12mm screws shown.

    편집

  6. HP Photosmart Premium C309g Scanner Glass Replacement: 5 단계, 이미지 1/1

    • The scanner flap is attached by a clip that can be dislodged by pulling it gently away from the printer.

    • Keeping the scanner flap upright, slide it toward the unattached clip in order to dislodge the second clip.

    • Both clips will come unattached and you can set the scanner flap aside.

    편집

  7. HP Photosmart Premium C309g Scanner Glass Replacement: 6 단계, 이미지 1/1

    • Lift the scanner glass piece from the printer.

    편집

  8. HP Photosmart Premium C309g Scanner Glass Replacement: 7 단계, 이미지 1/2 HP Photosmart Premium C309g Scanner Glass Replacement: 7 단계, 이미지 2/2

    • The scanner glass is attached to the plastic piece with adhesive tape.

    • Pull off the glass and re-set new piece of glass.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Laura

회원 가입일: 10/23/14

694 평판

안내서 3개 작성하였습니다

배지: 12

배지 +9개 더

팀

Michigan Tech, Team 1-2, Lauer Fall 2014 Michigan Tech, Team 1-2, Lauer Fall 2014 회원

MTU-LAUER-F14S1G2

3 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 754