이 버전에는 잘못된 편집 사항이 있을 수 있습니다. 최신 확인된 스냅샷으로 전환하십시오.
필요한 것
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Push the unlock tabs on the back of the monitor in and towards each other while sliding the back cover up.
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Loosen the two 1/2" screws , with the T15 Torx Screwdriver, on each side of the stand. Remove stand.
-
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Take out the single 3/8" screw, with the T15 Torx Screwdriver, from the middle of the backplate.
-
거의 끝나갑니다!
결승점