기기를 수리하세요 커뮤니티 상점

HP Stream 11-r014wm Top Cover Replacement

소개

Leave your computer on top of your car? Fix that broken HP Stream lid!

필요한 것

  1. HP Stream 11-r014wm Top Cover Replacement, Top Cover: 1 단계, 이미지 1/2 HP Stream 11-r014wm Top Cover Replacement, Top Cover: 1 단계, 이미지 2/2

    • Use a plastic spudger to remove two oblong screw covers on the bottom of the computer.

    • Use a plastic spudger to remove four rubber feet.

    • To remove the feet you must break the glue seal holding them down.

    번역하기

  2. HP Stream 11-r014wm Top Cover Replacement: 2 단계, 이미지 1/1

    • Remove the eleven 5 millimeter housing screws from the bottom of the computer using a #00 Phillips head screwdriver.

    번역하기

  3. HP Stream 11-r014wm Top Cover Replacement: 3 단계, 이미지 1/2 HP Stream 11-r014wm Top Cover Replacement: 3 단계, 이미지 2/2

    • Turn the computer over and open it.

    • Use a plastic spudger to pry the keyboard bezel away from the base. Pry around the edge, being careful not to jam the spudger too far underneath the bezel (potentially damaging internal components).

    • The bezel is tightest near the hinge.

    • Once the bezel is free, do not lift it away from the base.

    번역하기

  5. HP Stream 11-r014wm Top Cover Replacement: 4 단계, 이미지 1/2 HP Stream 11-r014wm Top Cover Replacement: 4 단계, 이미지 2/2

    • Identify two ribbon connectors and the ZIF cable underneath the keyboard.

    • Use tweezers to disconnect both ribbon cables and the ZIF connector.

    번역하기

  6. HP Stream 11-r014wm Top Cover Replacement: 5 단계, 이미지 1/1

    • Remove five 4 millimeter hinge-screws from the hinges of the laptop using a #00 Phillips head screwdriver.

    • There are three 4 millimeter hinge-screws on the right side.

    번역하기

  7. HP Stream 11-r014wm Top Cover Replacement: 6 단계, 이미지 1/2 HP Stream 11-r014wm Top Cover Replacement: 6 단계, 이미지 2/2

    • Use tweezers to disconnect the black power cable.

    • Remove the 3.5 millimeter screw from the WiFi chip using a #00 Phillips head screwdriver.

    • The upper and lower halves of the laptop should now be separated.

    번역하기

  8. HP Stream 11-r014wm Top Cover Replacement: 7 단계, 이미지 1/2 HP Stream 11-r014wm Top Cover Replacement: 7 단계, 이미지 2/2

    • Remove two 2 millimeter bezel screws using a #00 Phillips screwdriver.

    • Use a plastic spudger to pry the bezel away from the screen.

    • The bezel screws are covered by thin plastic.

    번역하기

  9. HP Stream 11-r014wm Top Cover Replacement: 8 단계, 이미지 1/1

    • Remove four 3 millimeter screen screws using a #00 Phillips head screwdriver.

    • Lift the screen with steady pressure until the glue seal breaks and releases the lid.

    번역하기

  10. HP Stream 11-r014wm Top Cover Replacement: 9 단계, 이미지 1/2 HP Stream 11-r014wm Top Cover Replacement: 9 단계, 이미지 2/2

    • Use a plastic spudger to peel away the copper filament.

    • The aluminum backing is part of the lid assembly, and does not need to be removed.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Anthony R Cardinali

회원 가입일: 04/05/18

988 평판

안내서 5개 작성하였습니다

배지: 9

배지 +6개 더

팀

Linn Benton Community College, Team S1-G3, Johnson Spring 2018 Linn Benton Community College, Team S1-G3, Johnson Spring 2018 회원

LBCC-JOHNSON-S18S1G3

4 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 3

전체 시간: 366