소개
Use this guide to replace a broken home button board.
필요한 것
-
-
In the following steps, you will use a metal spudger to lift the front panel out from the rear case of your TouchPad.
-
-
-
-
Use a plastic opening tool to pry the home button board off the adhesive securing it to the front panel.
-
거의 끝나갑니다!
To reassemble your device, follow these instructions in reverse order.
결론
To reassemble your device, follow these instructions in reverse order.
다른 한 분이 해당 안내서를 완성하였습니다.