주요 콘텐츠로 건너뛰기

HP eStation Zeen Volume Buttons Replacement

필요한 것

  1. HP eStation Zeen Volume Buttons Replacement, Volume Buttons: 1 단계, 이미지 1/3 HP eStation Zeen Volume Buttons Replacement, Volume Buttons: 1 단계, 이미지 2/3 HP eStation Zeen Volume Buttons Replacement, Volume Buttons: 1 단계, 이미지 3/3
    • Use a metal spudger to remove the four screw caps.

    • Remove the four 6 mm screws using a Philips #0 screwdriver.

  2. HP eStation Zeen Volume Buttons Replacement: 2 단계, 이미지 1/3 HP eStation Zeen Volume Buttons Replacement: 2 단계, 이미지 2/3 HP eStation Zeen Volume Buttons Replacement: 2 단계, 이미지 3/3
    • Insert a plastic opening tool and slide it along the edge to open the back panel.

    • Lift the back panel away from the device.

  3. HP eStation Zeen Volume Buttons Replacement: 3 단계, 이미지 1/1
    • Disconnect the battery clip with a plastic opening tool.

    • Be gentle as the connector is fragile.

  4. HP eStation Zeen Volume Buttons Replacement: 4 단계, 이미지 1/1
    • Remove the two 6 mm screws using a Philips #0 screwdriver.

  5. HP eStation Zeen Volume Buttons Replacement: 5 단계, 이미지 1/1
    • Pull the ribbon from the board.

    • Be gentle as the ribbon is fragile.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

dalton hale

회원 가입일: 09/26/16

503 평판

안내서 4개 작성하였습니다

USF Tampa, Team 16-4, Eyestone Fall 2016 USF Tampa, Team 16-4, Eyestone Fall 2016 회원

USFT-EYESTONE-F16S16G4

4 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 187