메인 콘텐츠로 스킵하기

소개

The iOS is the original firmware on the motherboard. In some cases the computer can malfunction due to errors in the iOS setting. This error can be fixed by resetting the iOS.

도구

지정된 도구가 없습니다.

부품

지정된 부품이 없습니다.

  1. Make sure the computer is unplugged.
    • Make sure the computer is unplugged.

    • Be sure to touch any metal surface with your hand to discharge any static electricity that might have built up.

    • Make sure all auxiliary cords are disconnected from the desktop. If not, remove them using your hands.

    • Set the desktop down horizontally with the front side facing you.

  2. Hold the desktop with two hands by grasping both sides of the desktop. Press the buttons on both sides using your index fingers.
    • Hold the desktop with two hands by grasping both sides of the desktop.

    • Press the buttons on both sides using your index fingers.

  3. 아이폰 배터리 수리 키트

    Only $29.99

    Buy Now

    아이폰 배터리 수리 키트

    Only $29.99

    Buy Now
  4. Slide the top cover about an inch forward using your thumb to push it towards you. Make sure that the bottom is still secured by both hands. Lay the desktop back on the table and pull the case forward as far as it can go.
    • Slide the top cover about an inch forward using your thumb to push it towards you.

    • Make sure that the bottom is still secured by both hands.

    • Lay the desktop back on the table and pull the case forward as far as it can go.

    • Lift the cover up and off.

  5. Press tab on the left side of the battery with your finger to release the battery from its position. The battery should pop up out off its socket easily. Once the battery has been removed, the BIOS is reset. Replace the battery back into its socket to complete the reset.
    • Press tab on the left side of the battery with your finger to release the battery from its position.

    • The battery should pop up out off its socket easily.

    • Once the battery has been removed, the BIOS is reset. Replace the battery back into its socket to complete the reset.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Alyssa Briones

회원 가입일: 2014년 01월 21일

1,447 평판

안내서 9개 작성하였습니다

Cal Poly, Team 6-23, Maness Winter 2014 Cal Poly, Team 6-23, Maness Winter 2014 회원

CPSU-MANESS-W14S6G23

4 회원들

안내서 9개 작성하였습니다

Hello.

I followed the above steps on an HP rp5700 desktop. Now the computer time and date is set back to 2000. I have entered setup to change date and time. However, the date and time does not change as I navigate date and time…. no change at all. I have changed this before on other rp5700 desktops but this just wont change.

Someone out there HELP.

Regards.

Turk.

turk.gaonnwe - 답글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 9

지난 30일: 19

전체 시간: 1,076