주요 콘텐츠로 건너뛰기

소개

Is your monitor not powering on? Is the power button making a weird clicking noise? You might need to replace the power button.

부품

지정된 부품이 없습니다.

  1. Do not put the metal spudger between the metal and the glass. It needs to go under the bezel and above the metal. Turn monitor so that the screen is facing you. Pry the black bezel from above the metal by placing your metal spudger between the bezel and the metal and twisting the tool slightly.
    • Do not put the metal spudger between the metal and the glass. It needs to go under the bezel and above the metal.

    • Turn monitor so that the screen is facing you.

    • Pry the black bezel from above the metal by placing your metal spudger between the bezel and the metal and twisting the tool slightly.

    • The best places to pry are in the lower left and lower right corners of the black bezel.

  2. Do not pull the screen away to hard, this could snap the power cable.
    • Do not pull the screen away to hard, this could snap the power cable.

    • Remove the power button from the top of the plastic frame.

  3. Remove the power cable by carefully sliding it out of it's plug.
    • Remove the power cable by carefully sliding it out of it's plug.

    • Check if there is any tear or fray in the cable.

결론

To reassemble your device, follow these instructions in reverse order.

Sadeq Taha

회원 가입일: 2016년 03월 25일

183 평판

안내서 1개 작성함

UMass Dartmouth, Team 1-1, Miles Spring 2016 UMass Dartmouth, Team 1-1, Miles Spring 2016 회원

UMASSD-MILES-S16S1G1

4 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 4

전체 시간: 194