부품

부품은 필요하지 않습니다.

  1. The first step is to remove the back case of the phone preferably with a plastic opening tool.
    • The first step is to remove the back case of the phone preferably with a plastic opening tool.

    댓글 쓰기

  2. The next step is to remove the battery from the phone by carefully lifting it out with your fingers.
    • The next step is to remove the battery from the phone by carefully lifting it out with your fingers.

    댓글 쓰기

    • Set the battery aside.

    댓글 쓰기

  3. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    • you should remove the six T5 screws holding the Inner frame in place. Be careful not to loose the screws

    댓글 쓰기

    • Using the plastic opening tools again, gently pry the inner frame apart from the rest of the phone

    • Remove the inner frame from the rest of the phone by lifting it off

    댓글 쓰기

    • Remove the five screws that are holding the stand in place.

    댓글 쓰기

    • Remove the stand from the frame by lifting it out. Clear any debis causing it to be jammed, or replace with new stand.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Sage Jurado

회원 가입일: 2014년 03월 13일

864 평판

안내서 4개 작성하였습니다

New Mexico State, Team 1-1, Easley Spring 2014 New Mexico State, Team 1-1, Easley Spring 2014 회원

NMSU-EASLEY-S14S1G1

5 회원들

안내서 4개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 78