주요 콘텐츠로 건너뛰기

소개

The vibrator is easy to find and remove after the housing has been taken off.

부품

지정된 부품이 없습니다.

  1. HTC HD2 Vibrator Replacement, Battery: 1 단계, 이미지 1/1
    • Carefully pull the rear cover from the back of the phone.

    • Place a finger beneath the small lip on the left side of the battery.

  2. HTC HD2 Vibrator Replacement: 2 단계, 이미지 1/2 HTC HD2 Vibrator Replacement: 2 단계, 이미지 2/2
    • Lay the phone down on it's screen.

    • Lift up on the lip and pull the battery from the phone.

  3. HTC HD2 Vibrator Replacement, Midframe: 3 단계, 이미지 1/2 HTC HD2 Vibrator Replacement, Midframe: 3 단계, 이미지 2/2
    • Remove the four black 3.5mm T5 screws from the back of the phone.

  4. HTC HD2 Vibrator Replacement: 4 단계, 이미지 1/2 HTC HD2 Vibrator Replacement: 4 단계, 이미지 2/2
    • Insert the flat end of a spudger between the midframe and the display.

    • Slide the spudger along the seam between the frame and the display.

    • Using the spudger for leverage, carefully pry the midframe away from the display assembly.

    • This process will take some effort. Continue to pry slowly and carefully until the frame begins to detach.

    • As it releases, pull the midframe away from the phone.

    • The volume control tab may fall off during removal. It can be easily reattached.

  5. HTC HD2 Vibrator Replacement, Vibrator: 5 단계, 이미지 1/2 HTC HD2 Vibrator Replacement, Vibrator: 5 단계, 이미지 2/2
    • Set the phone down on its screen.

    • Using tweezers, unplug the small vibrator connector from its socket on the motherboard.

  6. HTC HD2 Vibrator Replacement: 6 단계, 이미지 1/1
    • Pull the vibrator motor from the phone.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Nathan Puchalski

회원 가입일: 2011년 04월 26일

813 평판

안내서 5개 작성하였습니다

Cal Poly, Team 24-55, Amido Spring 2011 Cal Poly, Team 24-55, Amido Spring 2011 회원

CPSU-AMIDO-S11S24G55

5 회원들

안내서 16개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 5,702