주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

Remove 4 Torx screws and 2 #00 Philps

  1. First remove the back cover of your phone to expose the battery.
    • First remove the back cover of your phone to expose the battery.

  2. Turn the phone over.
    • Turn the phone over.

    • Push forward on the battery with your thumb.

  3. Take the battery out by lifting it upwards. When reassembling, make sure that the battery contacts match up.
    • Take the battery out by lifting it upwards.

    • When reassembling, make sure that the battery contacts match up.

  4. Remove the four 4.9mm T6 Torx screws that secure the back panel to the rest of the phone. Remove the four 4.9mm T6 Torx screws that secure the back panel to the rest of the phone.
    • Remove the four 4.9mm T6 Torx screws that secure the back panel to the rest of the phone.

  5. Remove the two 4.3mm Phillips #00 screws that secure the back panel to the rest of the phone.
    • Remove the two 4.3mm Phillips #00 screws that secure the back panel to the rest of the phone.

  6. Insert the plastic opening tool along the seams at different points to it pry the clips off. This may require a bit of force. The USB port cover may fall off in this step. This may require a bit of force. The USB port cover may fall off in this step.
    • Insert the plastic opening tool along the seams at different points to it pry the clips off.

    • This may require a bit of force. The USB port cover may fall off in this step.

결론

To reassemble your device, follow these instructions in reverse order.

Andrew Van Meter

회원 가입일: 2011년 10월 06일

24 평판

안내서 3개 작성하였습니다

Cal Poly, Team 20-29, Maness Fall 2011 Cal Poly, Team 20-29, Maness Fall 2011 회원

CPSU-MANESS-F11S20G29

4 회원들

안내서 9개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 2

전체 시간: 722