소개
This guide will lead the user through the process of disassembling their smart phone in order to remove the broken speaker. In just a few short, easy to follow steps this goal can be accomplished with little knowledge and only a few basic tools.
부품
부품은 필요하지 않습니다.
-
First, flip the phone over so that the back is facing you.
-
Next, using both thumbs, carefully push the back side of the phone's exterior up, removing it from the main section of the phone.
-
Set this piece aside until you need to reassemble the phone.
-
Insert thumb and pointer finger into the notch above the battery. Pull the battery away from the rest of the phone and set it aside.
-
Next, choose the matching tool from your driver kit and remove the six screws found around the perimeter of the phone.
-
Carefully pull off the back casing.
-
Next, remove the top screw.
-
Flip over the motherboard so that the front case is visible. Using a spudger, remove the speaker out of its holding cell.
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
팀
Cal Poly, Team 25-29, Garner Spring 2011 Cal Poly, Team 25-29, Garner Spring 2011 회원
CPSU-GARNER-S11S25G29
3 회원들
안내서 5개 작성하였습니다
