부품

부품은 필요하지 않습니다.

  1. Take the back cover off the phone and take the battery out.
    • Take the back cover off the phone and take the battery out.

    댓글 쓰기

  2. Take a SL#2.5 screwdriver and pop the black piece off shown here.
    • Take a SL#2.5 screwdriver and pop the black piece off shown here.

    댓글 쓰기

    • Take a T5 screwdriver and unscrew the two screws seen here

    댓글 쓰기

    • Unscrew the two screws on the back of the phone with a T5 screwdriver

    댓글 쓰기

  3. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
    • Take the SL#2.5 screwdriver and pry off the back cover

    • The phone should now look like the second picture

    댓글 쓰기

    • Next lift up the camera lens from the board.

    • Then pry off the circuit circled in red on the second picture

    댓글 쓰기

    • Take the SL#2.5 screwdriver and pry off the volume buttons on the side of the phone

    • The circuit board should now be detached from the LCD part of the phone

    댓글 쓰기

    • Next take the SL#2.5 screwdriver and pry the grey fabric sticker off on the LCD side of the phone

    댓글 쓰기

    • Next take the SL#2.5 screwdriver and pry the screen from the front plastic cover

    • The screen should come out with ease and be completely detached from the rest of the cover.

    댓글 쓰기

    • Replace screen with a new one.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Meuwissenm

회원 가입일: 2011년 10월 04일

16 평판

안내서 1개 작성함

UW Stout, Team 5-3, Zhou Fall 2011 UW Stout, Team 5-3, Zhou Fall 2011 회원

UWSTOUT-ZHOU-F11S5G3

4 회원들

안내서 3개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 1

전체 시간: 1,345