메뉴

설정

Hair Dryer Grating Replacement

작성자 Mitch (또 다른 기여자 10명)
  • 댓글 0
  • 즐겨찾기 1

난이도

보통

단계

5

소요 시간

시간 제안??

섹션

2

플래그

0

도구

해당 도구 구매

부품

지정된 부품이 없습니다.

  1. Identify the black air concentrating nozzle.

    • Identify the black air concentrating nozzle.

    편집

  2. Remove the black air concentrating nozzle by gently twisting and pulling the nozzle.

    • Remove the black air concentrating nozzle by gently twisting and pulling the nozzle.

    편집

  4. Using a screwdriver, remove the screw located underneath the air concentrating nozzle. This screw attaches the hair dryer body to the hair dryer grating.

    • Using a screwdriver, remove the screw located underneath the air concentrating nozzle. This screw attaches the hair dryer body to the hair dryer grating.

    • The purpose of this guide is to demonstrate the repair steps for a generic hair dryer. We do not specify screw sizes because screw sizes can differ between hair dryers. For most hair dryers, use a Phillips #1 Screwdriver. For hair dryers with smaller screws, consider using a Phillips #00 Screwdriver.

    편집

  5. Detach the hair dryer grating from the body by gently twisting the grating from side to side.

    • Detach the hair dryer grating from the body by gently twisting the grating from side to side.

    편집

  6. Separate the hair dryer grating into the three pieces seen in the image.

    • Separate the hair dryer grating into the three pieces seen in the image.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 10명과 함께

Mitch

회원 가입일: 2012년 10월 04일

31 평판

안내서 5개 작성하였습니다

배지: 9

배지 +6개 더

팀

Cal Poly, Team 24-29, Regan Fall 2012 Cal Poly, Team 24-29, Regan Fall 2012 회원

CPSU-REGAN-F12S24G29

5 회원들

안내서 6개 작성하였습니다

댓글 0개

의견 추가하세요

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 15

전체 시간: 1,692