메인 콘텐츠로 스킵하기

소개

This page will guide you through the replacement of the mixer release button on your Hamilton Beach Classic Stand Mixer 64650. This piece may break easily from normal use and it is important to remain in working order to make sure that the mixer's handle stays secured on the top of the stand.

부품

지정된 부품이 없습니다.

  1. Depress  mixer release button fully and lift mixer off of the platform. Remove the bowl from the stand. Remove the bowl from the stand.
    • Depress mixer release button fully and lift mixer off of the platform.

    • Remove the bowl from the stand.

  2. Remove and set aside the three 1.3 mm Philips #2 screws holding the plastic cover in place. Remove and set aside the three 1.3 mm Philips #2 screws holding the plastic cover in place. Remove and set aside the three 1.3 mm Philips #2 screws holding the plastic cover in place.
    • Remove and set aside the three 1.3 mm Philips #2 screws holding the plastic cover in place.

  3. 아이폰 배터리 수리 키트

    Only $29.99

    Buy Now

    아이폰 배터리 수리 키트

    Only $29.99

    Buy Now
  4. Shift the cover to allow the plastic retaining hook to fit through the hole easily. Lift the cover away.
    • Shift the cover to allow the plastic retaining hook to fit through the hole easily.

    • Lift the cover away.

  5. Fully depress the mixer release button, pushing it through the mounting hole. Push the button slightly upwards once it is inside the stand to access the spring underneath it. Carefully remove the button from the stand while leaving spring in place.
    • Fully depress the mixer release button, pushing it through the mounting hole.

    • Push the button slightly upwards once it is inside the stand to access the spring underneath it.

    • Carefully remove the button from the stand while leaving spring in place.

  6. Depress the spring slightly and lift upward to remove. Replace with a new spring to have a working button again. Replace with a new spring to have a working button again.
    • Depress the spring slightly and lift upward to remove.

    • Replace with a new spring to have a working button again.

결론

To reassemble your device, follow these instructions in reverse order.

Gwen Davis

회원 가입일: 2016년 03월 24일

519 평판

안내서 5개 작성하였습니다

UMass Dartmouth, Team 7-3, Catania Spring 2016 UMass Dartmouth, Team 7-3, Catania Spring 2016 회원

UMASSD-CATANIA-S16S7G3

3 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 4

전체 시간: 215