주요 콘텐츠로 건너뛰기

Hamilton Beach 70740 Power Cord Replacement

필요한 것

  1. Hamilton Beach 70740 Power Cord Replacement, Bowl and Lid: 1 단계, 이미지 1/2 Hamilton Beach 70740 Power Cord Replacement, Bowl and Lid: 1 단계, 이미지 2/2
    • Turn the bowl counterclockwise and lift.

  2. Hamilton Beach 70740 Power Cord Replacement, Base: 2 단계, 이미지 1/2 Hamilton Beach 70740 Power Cord Replacement, Base: 2 단계, 이미지 2/2
    • Using a #2 Phillips head screwdriver, remove the two 11 mm screws from the base.

    • Pull suction cups straight out.

  3. Hamilton Beach 70740 Power Cord Replacement: 3 단계, 이미지 1/3 Hamilton Beach 70740 Power Cord Replacement: 3 단계, 이미지 2/3 Hamilton Beach 70740 Power Cord Replacement: 3 단계, 이미지 3/3
    • Remove rubber caps using the heavy duty spudger.

    • Remove the four 11 mm screws using the #2 Phillips head screwdriver.

    • Pull base straight out.

  4. Hamilton Beach 70740 Power Cord Replacement, Power Cord: 4 단계, 이미지 1/3 Hamilton Beach 70740 Power Cord Replacement, Power Cord: 4 단계, 이미지 2/3 Hamilton Beach 70740 Power Cord Replacement, Power Cord: 4 단계, 이미지 3/3
    • Using a #2 Phillips head screwdriver, remove the four 9 mm screws.

    • From the open base pull the motor straight out.

  5. Hamilton Beach 70740 Power Cord Replacement: 5 단계, 이미지 1/1
    • Using the wire stripper crimping tool cut the black wire connection from the power cord to the motor and then rewire the new power cord to the motor.

  6. Hamilton Beach 70740 Power Cord Replacement: 6 단계, 이미지 1/2 Hamilton Beach 70740 Power Cord Replacement: 6 단계, 이미지 2/2
    • Remove the two 12 mm screws using the #2 Phillips head screwdriver.

    • Remove plastic piece.

  7. Hamilton Beach 70740 Power Cord Replacement: 7 단계, 이미지 1/2 Hamilton Beach 70740 Power Cord Replacement: 7 단계, 이미지 2/2
    • Remove the three 12 mm screws using the #2 Phillips head screwdriver.

    • Remove the plastic piece by pulling straight up.

  8. Hamilton Beach 70740 Power Cord Replacement: 8 단계, 이미지 1/2 Hamilton Beach 70740 Power Cord Replacement: 8 단계, 이미지 2/2
    • Remove the power cord from the ground by removing the solder with the soldering tool.

    • Solder the new ground from the new power cord.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Travis Williams

회원 가입일: 02/02/17

552 평판

안내서 5개 작성하였습니다

USF Tampa, Team 17-4, Blackwell Spring 2017 USF Tampa, Team 17-4, Blackwell Spring 2017 회원

USFT-BLACKWELL-S17S17G4

3 회원들

안내서 7개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 11

전체 시간: 810