기기를 수리하세요 커뮤니티 상점

Hamilton-T1 Battery Replacement

의료 장비
iFixit과 이 수리 안내서는 의료 기기 제조업체가 보증하지 않으며 제휴 관계가 없습니다.

소개

If you need to replace the optional second, hot swappable battery in your Hamilton-T1 ventilators, follow this guide. The hot-swappable battery is a secondary battery that provides power to the Hamilton-T1 ventilator when the standard primary battery runs out of charge or there is no external AC/DC power source available. This is a simple replacement to swap out the old battery with a charged battery. There are no tools involved.

  1. Hamilton-T1 Battery Replacement, Battery: 1 단계, 이미지 1/2 Hamilton-T1 Battery Replacement, Battery: 1 단계, 이미지 2/2

    • Use the handle on the left side of the front panel to pull the cover off.

    번역하기

  2. Hamilton-T1 Battery Replacement: 2 단계, 이미지 1/1

    • Locate the metal lock clip above the battery on the left-hand side.

    • Turn the metal lock clip to the left and all the way up.

    • This will allow access to the battery.

    번역하기

  3. Hamilton-T1 Battery Replacement: 3 단계, 이미지 1/1

    • Pull the white tab on the end of the battery to pull it out of the slot.

    번역하기

    • Insert the replacement battery by holding onto the white tab and sliding it into the empty slot.

    • The Hamilton Medical logo needs to be facing up.

    번역하기

  5. Hamilton-T1 Battery Replacement: 5 단계, 이미지 1/1

    • Turn the metal locking clip down and to the right, until it forms a straight line.

    번역하기

    • Close the cover.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 1명과 함께

Amanda Olla

회원 가입일: 04/07/20

255 평판

안내서 1개 작성함

배지: 4

+1개 배지 추가

팀

Cal Poly, Team S11-G24, Paton Spring 2020 Cal Poly, Team S11-G24, Paton Spring 2020 회원

CPSU-PATON-S20S11G24

3 회원들

안내서 3개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 12

30일 전: 47

전체 시간: 1,320