부품

부품은 필요하지 않습니다.

Place Visor Edge face down.
  • Place Visor Edge face down.

  • Notice the tab connecting the flip cover to the back of the PDA.

  • Gently push tab forward.

  • Do not pull on the flip cover to try and remove it from the PDA.

댓글 쓰기

Once flip cover is removed, turn over and remove the four 3.9 mm screws connecting the hinge.
  • Once flip cover is removed, turn over and remove the four 3.9 mm screws connecting the hinge.

댓글 쓰기

  • Gently pull away the plastic hinge from the cover.

  • Be careful to pull out evenly and not bend the plastic, as it can crack.The spring may also shoot out if it is not pulled out evenly.

댓글 쓰기

  • Turn the hinge piece on its side or use a screwdriver to pull out the spring.

  • Reinsert new spring.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Blaize Steiger

회원 가입일: 2011년 01월 30일

101 평판

안내서 1개 작성함

Cal Poly, Team 11-28, Maness Winter 2011 Cal Poly, Team 11-28, Maness Winter 2011 회원

CPSU-MANESS-W11S11G28

4 회원들

안내서 7개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 959