기기를 수리하세요 커뮤니티 상점

Harman Kardon Invoke LED Board Replacement

소개

If the LED lights do not function after troubleshooting, you might need to change the LED Board. For this replacement you need a Phillips #2 screw driver and a metal spudger.

필요한 것

  1. Harman Kardon Invoke LED Board Replacement, LED Board: 1 단계, 이미지 1/3 Harman Kardon Invoke LED Board Replacement, LED Board: 1 단계, 이미지 2/3 Harman Kardon Invoke LED Board Replacement, LED Board: 1 단계, 이미지 3/3

    • Use a metal spudger to remove the top cover.

    • Use a Phillips #2 screwdriver to remove three 17 mm screws.

    편집

  3. Harman Kardon Invoke LED Board Replacement: 2 단계, 이미지 1/3 Harman Kardon Invoke LED Board Replacement: 2 단계, 이미지 2/3 Harman Kardon Invoke LED Board Replacement: 2 단계, 이미지 3/3

    • Grip larger cable connected to LED board and pull volume wheel until both are disconnected from the cable.

    • Pull lightly on the LED board to disconnect the smaller LED board cable from volume wheel.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Khalid Almutairi

회원 가입일: 10/02/18

85 평판

안내서 1개 작성함

배지: 2

팀

Eastern Washington University, Team S2-G2, Munoz Fall 2018 Eastern Washington University, Team S2-G2, Munoz Fall 2018 회원

EWU-MUNOZ-F18S2G2

3 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 5

30일 전: 7

전체 시간: 507