기기를 수리하세요 커뮤니티 상점

Health o Meter HDR743 Power Supply Replacement

필요한 것

  1. Health o Meter HDR743 Power Supply Replacement, Power Supply: 1 단계, 이미지 1/1

    • Connect a voltmeter at the power supply’s connection to the circuit board and the power supply.

    • If the the voltage at the power supply is incorrect, the power supply should be replaced.

    편집

  2. Health o Meter HDR743 Power Supply Replacement: 2 단계, 이미지 1/1

    • Use wire strippers to cut the wired connection to the power supply.

    • If the wires need replacing, you will need to use a soldering iron and remove the connections at the board.

    편집

  4. Health o Meter HDR743 Power Supply Replacement: 3 단계, 이미지 1/1

    • Use the wire strippers to cut off the rubber ends of the power supply wires.

    • Use a soldering iron and solder to fuse the connections between the two wires.

    편집

  5. Health o Meter HDR743 Power Supply Replacement: 4 단계, 이미지 1/2 Health o Meter HDR743 Power Supply Replacement: 4 단계, 이미지 2/2

    • Test the power supply once the wires have been reconnected.

    • If the Health o Meter still has power issues, check the connections between the new power supply and the board.

    • If no issues are found, the circuit board may need to be replaced.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 8명과 함께

Dennis White Jr

회원 가입일: 04/02/18

217 평판

안내서 2개 작성하였습니다

배지: 4

+1개 배지 추가

팀

University of Memphis, Team S1-G1, Kim Spring 2018 University of Memphis, Team S1-G1, Kim Spring 2018 회원

UM-KIM-S18S1G1

3 회원들

안내서 4개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 7

30일 전: 9

전체 시간: 126