기기를 수리하세요 커뮤니티 상점

Hipstreet Titan 2 HD Battery Replacement

소개

Users must disassemble the front cover to replace the battery. A replacement battery will be needed. This is a difficult process for users who do not have experience with soldering connections.

필요한 것

  1. Hipstreet Titan 2 HD Battery Replacement, Rear Case: 1 단계, 이미지 1/1

    • Using the PH#00 screwdriver, remove the two 0.145 inch Phillips head screws.

    • The screws are located on the bottom face of the device, near the power and volume controls.

    번역하기

  2. Hipstreet Titan 2 HD Battery Replacement: 2 단계, 이미지 1/1

    • Place the small suction cup on your screen.

    • Moisturize the bottom of the suction cup to ensure a proper seal.

    • If the screen is cracked, the suction cup may not seal correctly; too much pressure may crack or damage the screen.

    번역하기

  3. Hipstreet Titan 2 HD Battery Replacement: 3 단계, 이미지 1/1

    • Insert the plastic opening tool between the screen cover and rear cover of the tablet.

    • Grasp the small suction cup.

    번역하기

  5. Hipstreet Titan 2 HD Battery Replacement: 4 단계, 이미지 1/2 Hipstreet Titan 2 HD Battery Replacement: 4 단계, 이미지 2/2

    • Slide the plastic opening tool along device edge to separate the screen cover from the rear cover.

    • Pull upward on the small suction cup handle while sliding the opening tool.

    • When sliding the plastic opening tool, avoid sliding the tool too far into the cover. This could damage the speaker connector on the back cover.

    번역하기

  6. Hipstreet Titan 2 HD Battery Replacement: 5 단계, 이미지 1/2 Hipstreet Titan 2 HD Battery Replacement: 5 단계, 이미지 2/2

    • Use the plastic opening tool to remove the speaker from the rear cover.

    • The speaker is held in place with adhesive and is easily removed.

    • Do not pull on the speaker wires. This could damage the soldering connections.

    번역하기

  7. Hipstreet Titan 2 HD Battery Replacement: 6 단계, 이미지 1/1

    • Once the speaker is disconnected, the cover removal is complete.

    번역하기

  8. Hipstreet Titan 2 HD Battery Replacement, Battery: 7 단계, 이미지 1/2 Hipstreet Titan 2 HD Battery Replacement, Battery: 7 단계, 이미지 2/2

    • Remove the black placement tape from the battery.

    • Find the two battery solder connections on the circuit board.

    번역하기

  9. Hipstreet Titan 2 HD Battery Replacement: 8 단계, 이미지 1/1

    • Remove the red and black battery wires from the circuit board with the solder removal tool.

    번역하기

  10. Hipstreet Titan 2 HD Battery Replacement: 9 단계, 이미지 1/1

    • Solder the new battery wire connectors to the circuit board.

    • The battery wires must be installed with the red wire on the left and black wire on the right.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 4명과 함께

Jeffrey

회원 가입일: 03/11/15

766 평판

안내서 5개 작성하였습니다

배지: 10

배지 +7개 더

팀

Colorado Springs, Team 5-6, Panko Spring 2015 Colorado Springs, Team 5-6, Panko Spring 2015 회원

UCCS-PANKO-S15S5G6

3 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 4

전체 시간: 4,269