기기를 수리하세요 커뮤니티 상점

Honda S2000 VTEC Solenoid Upper Replacement

소개

This is a guide to change a S2000s Vtec solenoid upper which is a part that is known to fail with time

필요한 것

  1. Honda S2000 VTEC Solenoid Upper Replacement, VTEC Solenoid Upper: 1 단계, 이미지 1/2 Honda S2000 VTEC Solenoid Upper Replacement, VTEC Solenoid Upper: 1 단계, 이미지 2/2

    • Locate Vtec Solenoid on front left of engine.

    번역하기

  2. Honda S2000 VTEC Solenoid Upper Replacement: 2 단계, 이미지 1/3 Honda S2000 VTEC Solenoid Upper Replacement: 2 단계, 이미지 2/3 Honda S2000 VTEC Solenoid Upper Replacement: 2 단계, 이미지 3/3

    • Locate and remove 3 bolts.

    • Do not drop cable that is attached by a bolt.

    번역하기

  3. Honda S2000 VTEC Solenoid Upper Replacement: 3 단계, 이미지 1/3 Honda S2000 VTEC Solenoid Upper Replacement: 3 단계, 이미지 2/3 Honda S2000 VTEC Solenoid Upper Replacement: 3 단계, 이미지 3/3

    • Pull the plug upwards off of metal cable holder, and then disconnect the two cables.

    번역하기

  5. Honda S2000 VTEC Solenoid Upper Replacement: 4 단계, 이미지 1/3 Honda S2000 VTEC Solenoid Upper Replacement: 4 단계, 이미지 2/3 Honda S2000 VTEC Solenoid Upper Replacement: 4 단계, 이미지 3/3

    • Remove the metal cable holder and set it to the side.

    • Pull off the upper Vtec Solenoid.

    번역하기

  6. Honda S2000 VTEC Solenoid Upper Replacement: 5 단계, 이미지 1/3 Honda S2000 VTEC Solenoid Upper Replacement: 5 단계, 이미지 2/3 Honda S2000 VTEC Solenoid Upper Replacement: 5 단계, 이미지 3/3

    • Grab a new replacement upper Solenoid.

    • Place the gasket (new or used if still good) into its slot.

    • Spread a small amount of oil all along the gasket.

    번역하기

  7. Honda S2000 VTEC Solenoid Upper Replacement: 6 단계, 이미지 1/2 Honda S2000 VTEC Solenoid Upper Replacement: 6 단계, 이미지 2/2

    • Insert wisdom here.

    번역하기

  8. Honda S2000 VTEC Solenoid Upper Replacement: 7 단계, 이미지 1/3 Honda S2000 VTEC Solenoid Upper Replacement: 7 단계, 이미지 2/3 Honda S2000 VTEC Solenoid Upper Replacement: 7 단계, 이미지 3/3

    • Grab metal cable holder and place one of the bolts into it.

    • Hand tighten all three bolts.

    • Ensure the metal cable holder is straight.

    번역하기

  9. Honda S2000 VTEC Solenoid Upper Replacement: 8 단계, 이미지 1/3 Honda S2000 VTEC Solenoid Upper Replacement: 8 단계, 이미지 2/3 Honda S2000 VTEC Solenoid Upper Replacement: 8 단계, 이미지 3/3

    • Tighten all 3 bolts with a ratchet.

    • Plug the cable back in, and attach it to the metal holder.

    번역하기

  10. Honda S2000 VTEC Solenoid Upper Replacement: 9 단계, 이미지 1/2 Honda S2000 VTEC Solenoid Upper Replacement: 9 단계, 이미지 2/2

    • Wipe down the edges where the two parts meet to pick up any oil that may have spilled.

    • Keep a eye on solenoid for any oil leaking after cleaning.

    번역하기
결론

You now have a proper working Solenoid, Just make sure to keep an eye on the solenoid in case of any oil leaks

작성자

다른 기여자 1명과 함께

Angeljauregui

회원 가입일: 03/12/24

169 평판

안내서 1개 작성함

배지: 3

팀

CSU Los Angeles, Team 1-17, Harris Spring 2024 CSU Los Angeles, Team 1-17, Harris Spring 2024 회원

CSULA-HARRIS-S24S1G17

1 회원

안내서 1개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 6

30일 전: 29

전체 시간: 65