Hoover T-Series WindTunnel Pet UH30310 Brush Replacement - iFixit 수리 안내서

소개

Use this guide to replace the brush in the head of the vacuum.

필요한 것

1 단계 Brush

Hoover T-Series WindTunnel Pet UH30310 Brush Replacement, Brush: 1 단계, 이미지 1/2

Hoover T-Series WindTunnel Pet UH30310 Brush Replacement, Brush: 1 단계, 이미지 2/2

Place the vacuum on its back.
On the bottom right side, push the red lever to the left.
Remove the plastic cover.

2 단계

Hoover T-Series WindTunnel Pet UH30310 Brush Replacement: 2 단계, 이미지 1/3

Hoover T-Series WindTunnel Pet UH30310 Brush Replacement: 2 단계, 이미지 2/3

Hoover T-Series WindTunnel Pet UH30310 Brush Replacement: 2 단계, 이미지 3/3

Grab the red switch under the brush and push left.
Then remove the plastic base plate.

3 단계

Hoover T-Series WindTunnel Pet UH30310 Brush Replacement: 3 단계, 이미지 1/3

Hoover T-Series WindTunnel Pet UH30310 Brush Replacement: 3 단계, 이미지 2/3

Hoover T-Series WindTunnel Pet UH30310 Brush Replacement: 3 단계, 이미지 3/3

Use a Phillips #1 screwdriver to remove the two screws on the right side of the brush.

4 단계

Hoover T-Series WindTunnel Pet UH30310 Brush Replacement: 4 단계, 이미지 1/3

Hoover T-Series WindTunnel Pet UH30310 Brush Replacement: 4 단계, 이미지 2/3

Hoover T-Series WindTunnel Pet UH30310 Brush Replacement: 4 단계, 이미지 3/3

Remove the two screws on the left side of the brush.

5 단계

Hoover T-Series WindTunnel Pet UH30310 Brush Replacement: 5 단계, 이미지 1/3

Hoover T-Series WindTunnel Pet UH30310 Brush Replacement: 5 단계, 이미지 2/3

Hoover T-Series WindTunnel Pet UH30310 Brush Replacement: 5 단계, 이미지 3/3

Pull the clear plastic away from the head of the vacuum.
Slide the belt off the metal rod with your finger.
Pull the brush free.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Erik Ingels

회원 가입일: 01/18/18

193 평판

안내서 2개 작성하였습니다

팀

Cal Poly, Team S12-G4, Banghart Winter 2018 Cal Poly, Team S12-G4, Banghart Winter 2018 회원

CPSU-BANGHART-W18S12G4

5 회원들

안내서 9개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 1

7일 전: 3

30일 전: 10

전체 시간: 349